|
Author
|
Topic: My 1968 Mustang Fastback **STARTED IT!**
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
 
 
Old post got deleted or i just can't find it so i am just going to make a new one.
This is what it looked like when i bought it on feb. 13th 2006
I got it media blasted and this is what it looked like when i got it back. Had some damage. I spent a lot of time on the bodywork, probably longer than i should have but i was working at the time and didn't have much time to finish.
Front Suspension:
- Martz custom frame
- QA1 Coil overs
- Flaming river steering
- Wilwood 13 inch disc brakes
Rear Suspenion:
- Martz coil overs
- Fully adjustable 4 link
- Ford 9" with 3.89 gears, 35spline axles and a detroit locker with 13 inch Wilwood disc brakes
The Motor:
460 bored and stroked to 532 Big Block Ford;
- Probe pistons
- Canton Oil pan
- .588 intake, .614 exhaust cam
- Edelbrock Heads and Intake
- Crane Cams rocker arm girdle
- 950cfm Holly Carb
- MSD ignition/MSD distributor
The Drivetrain:
- Centerforce Dual Friction Clutch
- Lakewood bullet proof bellhousing
- TKO600
- Aluminum driveshaft
The Interior:
- Black interior
- 4 point roll bar
- Autometer gauges in stock dash
- Brushed aluminum dash
- Stock leather seats
- Custom Center console to hold my stereo unit and 3 more Autometer guages
- Kenwood DVD/GPS headunit with 2 5" Pioneer speakers, 2 6x9 Pioneer speakers and a Pheonix Gold 300Watt Amp and a PG 10" Sub.
- I knew with all the torque the big block was going to give me i needed subframe connectors so i cut the floor to put them in
Exterior:
- Laser Red Paint
- Shelby GT500 Scoops
- Shelby Torq-Thrust M wheels with Nitto 315 drag radials in the rear and Nitto 245 tires in the front
- The only badging i am going to put on this car is a Shelby snake in the front grill and possibly get my cousin to paint 532 into the side of the cowl hood.
- Wanted to keep it as stock looking as possible on the exterior but i forgot how tall the 460 motors are so i had to get a big cowl.
If you wanna see more pictures go here
http://www.cardomain.com/ride/2964117
I'll keep adding more description...
[ January 30, 2010, 10:02 PM: Message edited by: WildFire532FB ]
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
|
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
Yeah...... that shit tight ![[Big Grin]](biggrin.gif)
--------------------
Signature Wheel Ford Representative
Email: Terrance@Signaturewheel.com
Instagram: @Signature_Wheel_Mustang
Web: www.SignatureWheel.com
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
Luke87GT
Lay'n more stripes
than Caltrans
Member # 21
|
posted
Excellent job!
![[patriot]](graemlins/patriot.gif)
Posts: 7802 | From: San Mateo | Registered: Jul 2000
| :
|
|
venomous99
¯
Member # 1917
|
posted
thats one bad ass build and one that requires a novel to document it properly. so much detail w/ that project from start to finish. hope u took tons of pics to show the entire process
--------------------
MKII Q7
89LX
Posts: 4811 | From: dc | Registered: Oct 2002
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
Thanks guys. i started working on the Headers tonight. Looks like its going to be harder than i thought it was going to be.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
SAMACH1
¯
Member # 7042
|
posted
sick ass fastback ![[worship]](graemlins/worship.gif)
--------------------
- STREET ACTIONS CC -
Advanced Auto Built
Bob Kurgan Tuned
Posts: 1668 | From: EAST BAY | Registered: Sep 2006
| :
|
|
NiftyWhiteFifty
¯
Member # 4320
|
posted
Can't wait to see a vid of that beast firing up. are you guys gonna take a video of the first start up?
--------------------
'05 F150 4x4
Posts: 2056 | From: San Jose | Registered: Mar 2004
| :
|
|
Eddie510-
CAFords OG
Member # 2354
|
posted
BADDEST FASTBACK IN NORCAL!
--------------------
"I like to be more politicaly correct than what I really believe so I can get more frinds here on CaFords"-Cummings "TIPICKLE"
Posts: 6557 | Registered: Jan 2003
| :
|
|
siri95
CAFords OG
Member # 2840
|
posted
damnnn that fb is siiiicccckkkk!!!
--------------------
1995 Mustang GT (sold)
1992 Ford F-150 XLT (sold)
1986 Mustang SVO (sold)
Posts: 783 | From: 510 | Registered: May 2003
| :
|
|
90FoX
FoX
Member # 1974
|
posted
You already know how I feel about that car bro!
Posts: 5364 | From: Shooting Skeet | Registered: Oct 2002
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by NiftyWhiteFifty:
Can't wait to see a vid of that beast firing up. are you guys gonna take a video of the first start up?
Of course i am going to ![[Wink]](wink.gif) Open headers too
I am kinda nervous on how loud its going to be.
The exhuast is going to be the long tubes i am building now into an x pipe and then into mufflers dumped (i hate tail pipes) but its going to be loud as hell so not sure what kind of mufflers i should get.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
68dustin
CAFords OG
Member # 5388
|
posted
hey are you gonna run the rocker molding on the bottom of the door???
--------------------
"As I lay rubber down the street, I pray for traction that I can keep, and if I do begin to slide, please dear God protect me and my ride!"
Posts: 3991 | From: neverland | Registered: Feb 2005
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by 68dustin:
hey are you gonna run the rocker molding on the bottom of the door???
No i welded those holes up.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
68dustin
CAFords OG
Member # 5388
|
posted
Did you fill the seam that runs from the quarter panel to the lower rocker?? if so what did you fill it in with? im getting ideas for my mustang next year. After next hot august nights im gonna start diggin back into mine for some fresh paint.
[ November 10, 2009, 01:17 PM: Message edited by: 68dustin ]
--------------------
"As I lay rubber down the street, I pray for traction that I can keep, and if I do begin to slide, please dear God protect me and my ride!"
Posts: 3991 | From: neverland | Registered: Feb 2005
| :
|
|
Scoop
¯
Member # 8726
|
posted
i would give up my left nut for that car ![[Whoo Whooooo!]](graemlins/woowoo.gif)
Posts: 1121 | From: Out Chillin | Registered: Nov 2008
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by 68dustin:
Did you fill the seam that runs from the quarter panel to the lower rocker?? if so what did you fill it in with? im getting ideas for my mustang next year. After next hot august nights im gonna start diggin back into mine for some fresh paint.
hmm i think we're talking about two different things. Where exactly are you talking about?
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
|
|
68dustin
CAFords OG
Member # 5388
|
posted
 these seams...???
--------------------
"As I lay rubber down the street, I pray for traction that I can keep, and if I do begin to slide, please dear God protect me and my ride!"
Posts: 3991 | From: neverland | Registered: Feb 2005
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
Oh ok, The front seem is still there, the rear one as you can tell had damage one both sides so when i fixed them i just welded them up. Used body filler to fill in the rest.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
68dustin
CAFords OG
Member # 5388
|
posted
Thanks...
--------------------
"As I lay rubber down the street, I pray for traction that I can keep, and if I do begin to slide, please dear God protect me and my ride!"
Posts: 3991 | From: neverland | Registered: Feb 2005
| :
|
|
92stangLX
¯
Member # 3252
|
posted
WOW! ![[Eek!]](eek.gif) I am amazed at how much time and effort you have put into this car over the last few years.
This thing looks KILLER! Can't wait to see (and hear) it when you get it done.
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
87droptop50
Go Giants!
Member # 7185
|
posted
This thing is a beast !!! Great job on your build
I wish I could post pics of my project LS1 el camino I'd get no love on here. I'm painting it this month and finishing the front suspension ...
my uncle has a 70 vert. Laser red with I think the same wheels that you have with 315s in the rear too . I'll try to post pics this weekend
--------------------
HighSpeed Motorsports
87Mustang Gt Conv kurgan tuned
03Harley F150 #5023
69El Camino SS396 -sold
99 f350 7.3 DRW
Posts: 3855 | From: SF | Registered: Oct 2006
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
So i got pretty much one side of the headers done today. I thought it was going to take me a month the way it started out but once my dad and i got into it we started getting ideas and putting things together.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17580 | From: 530 | Registered: Jun 2002
| :
|
|
drews50
CAFords OG
Member # 2670
|
posted
again, looks awesome!
although i still vote for going hoodless some of the time, that engine is a work of art in itself!
--------------------
*shiftylx*
2013 Race Red 5.0 "Lucy"
1967 Lime Gold 289 coupe "Ethel"
Posts: 2457 | From: phoenix | Registered: Apr 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
