|
Author
|
Topic: Wtb k member for a fox for a modulare engine swap
|
ONEFAST427R
¯
Member # 13977
|
posted
 
 
Looking for a k member for a modulare swap
For a 91foxbody
5108603121 Jay
Posts: 70 | From: Richmond | Registered: Feb 2015
| :
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
Find a stock 4.6 K-member. You will need to trim a little on the rear brackets and slot the holes because the location is a little off. If you are trying to retain the smog stuff, you will have to move the motor mount location so the motor shifts forward a minimum of 1/2". This is to allow the hard line from the egr to not hit the knife edge where the cowl panel meets the firewall panel.
--------------------
Project 93GT500 has started
90 Coyote Coupe (sold)
88 Mach 1 Coupe MM&FF 6/14 (sold)
65 FFR Cobra (sold)
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|
snake king
¯
Member # 9366
|
posted
This is they guy to listen to he know what he is talking about he help me out a lot on my build , love the way my motor seas in my car there is space all around the motor it looks like it was meant to be in that car , hands down robort is the guy to ask any ? To!!!
--------------------
93 fox /04 mach1 swap #32vfoxx
03 mach all stock
93 teal cobra #1685
93 teal cobra 347(sold)
03 sonic blue cobra(sold)
Sna8kkng
Posts: 774 | From: hayward | Registered: Aug 2009
| :
|
|
ONEFAST427R
¯
Member # 13977
|
posted
Thanks bro
Posts: 70 | From: Richmond | Registered: Feb 2015
| :
|
|
Que
¯
Member # 13828
|
posted
not sure if what i got will work but im taking my k member out my 99 and going tubeular you can have her for what ever
--------------------
Quienton Smith
Posts: 52 | From: Sacramento | Registered: Nov 2014
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
