This is topic Wtb k member for a fox for a modulare engine swap in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=126395
Posted by ONEFAST427R (Member # 13977) on
:
Looking for a k member for a modulare swap
For a 91foxbody
5108603121 Jay
Posted by RRRCobraSC281 (Member # 7086) on
:
Find a stock 4.6 K-member. You will need to trim a little on the rear brackets and slot the holes because the location is a little off. If you are trying to retain the smog stuff, you will have to move the motor mount location so the motor shifts forward a minimum of 1/2". This is to allow the hard line from the egr to not hit the knife edge where the cowl panel meets the firewall panel.
Posted by snake king (Member # 9366) on
:
This is they guy to listen to he know what he is talking about he help me out a lot on my build , love the way my motor seas in my car there is space all around the motor it looks like it was meant to be in that car , hands down robort is the guy to ask any ? To!!!
Posted by ONEFAST427R (Member # 13977) on
:
Thanks bro
Posted by Que (Member # 13828) on
:
not sure if what i got will work but im taking my k member out my 99 and going tubeular you can have her for what ever
Fueled by Ford Mustang Owners
on CaliforniaFords.com