T O P I C R E V I E W
|
ONEFAST427R
Member # 13977
|
posted
Looking for a k member for a modulare swap For a 91foxbody
5108603121 Jay
|
RRRCobraSC281
Member # 7086
|
posted
Find a stock 4.6 K-member. You will need to trim a little on the rear brackets and slot the holes because the location is a little off. If you are trying to retain the smog stuff, you will have to move the motor mount location so the motor shifts forward a minimum of 1/2". This is to allow the hard line from the egr to not hit the knife edge where the cowl panel meets the firewall panel.
|
snake king
Member # 9366
|
posted
This is they guy to listen to he know what he is talking about he help me out a lot on my build , love the way my motor seas in my car there is space all around the motor it looks like it was meant to be in that car , hands down robort is the guy to ask any ? To!!!
|
ONEFAST427R
Member # 13977
|
posted
Thanks bro
|
Que
Member # 13828
|
posted
not sure if what i got will work but im taking my k member out my 99 and going tubeular you can have her for what ever
|