|
Author
|
Topic: MODULAR 5.1L Stroker parts Block, Crank, Rods, and more!
|
06Xrunner
¯
Member # 6992
|
posted
 
 
I have a freshly machined Windsor block that's .020 Oversized, just balanced & knife edged crankshaft, forged rods, FMS oil pump, ARP main studs, Canton oil pan, and Canton windage tray.
I was told the pistons ring lands are out of spec therefor they should be replaced. I ran it with this setup and it used oil but still ran fine.
7 rods pistons are shown but 8 are included. The timing chains and tensioners only have 1500 miles on them. The crank and oil pump have under 5k.
MOTOR IS NOT ASSEMBLED SEE PICTURES!!!
$1000 for everything!!!
I also have energy suspension motor mounts and 03 Cobra Radiator available separately.
--------------------
01 Black GT 526WHP sold
2012 5.0 GT 625WHP sold
1984 Buick G/N Built and boosting...
Posts: 2124 | From: Chico, Ca | Registered: Aug 2006
| :
|
|
06Xrunner
¯
Member # 6992
|
posted
Ttt
--------------------
01 Black GT 526WHP sold
2012 5.0 GT 625WHP sold
1984 Buick G/N Built and boosting...
Posts: 2124 | From: Chico, Ca | Registered: Aug 2006
| :
|
|
06Xrunner
¯
Member # 6992
|
posted
Ttt
--------------------
01 Black GT 526WHP sold
2012 5.0 GT 625WHP sold
1984 Buick G/N Built and boosting...
Posts: 2124 | From: Chico, Ca | Registered: Aug 2006
| :
|
|
06Xrunner
¯
Member # 6992
|
posted
Ttt
--------------------
01 Black GT 526WHP sold
2012 5.0 GT 625WHP sold
1984 Buick G/N Built and boosting...
Posts: 2124 | From: Chico, Ca | Registered: Aug 2006
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
