This is topic MODULAR 5.1L Stroker parts Block, Crank, Rods, and more! in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=124197

---

Posted by 06Xrunner (Member # 6992) on :
 
I have a freshly machined Windsor block that's .020 Oversized, just balanced & knife edged crankshaft, forged rods, FMS oil pump, ARP main studs, Canton oil pan, and Canton windage tray.

I was told the pistons ring lands are out of spec therefor they should be replaced. I ran it with this setup and it used oil but still ran fine.

7 rods pistons are shown but 8 are included. The timing chains and tensioners only have 1500 miles on them. The crank and oil pump have under 5k.

MOTOR IS NOT ASSEMBLED SEE PICTURES!!!

$1000 for everything!!!

I also have energy suspension motor mounts and 03 Cobra Radiator available separately.














 

---

Posted by 06Xrunner (Member # 6992) on :
 
Ttt
 

---

Posted by 06Xrunner (Member # 6992) on :
 
Ttt
 

---

Posted by 06Xrunner (Member # 6992) on :
 
Ttt
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com