T O P I C R E V I E W
|
06Xrunner
Member # 6992
|
posted
I have a freshly machined Windsor block that's .020 Oversized, just balanced & knife edged crankshaft, forged rods, FMS oil pump, ARP main studs, Canton oil pan, and Canton windage tray.
I was told the pistons ring lands are out of spec therefor they should be replaced. I ran it with this setup and it used oil but still ran fine.
7 rods pistons are shown but 8 are included. The timing chains and tensioners only have 1500 miles on them. The crank and oil pump have under 5k.
MOTOR IS NOT ASSEMBLED SEE PICTURES!!!
$1000 for everything!!!
I also have energy suspension motor mounts and 03 Cobra Radiator available separately.
|
06Xrunner
Member # 6992
|
posted
Ttt
|
06Xrunner
Member # 6992
|
posted
Ttt
|
06Xrunner
Member # 6992
|
posted
Ttt
|
|