v-town coupe
fordologist
Member # 2771
|
posted
 
 
i did sell my short block now im gonna test the water with the heads i have a set of the smog legal afr cnc'd heads they are the 185cc heads with 58cc combustion chambers and have the 2.02/1.60 valves and accept the ped mount style rockers when i first got them i had them sent out to have the springs set up for cam shafts in the 218 deg of duration @ .050 up to about 230 deg of duration @.050 and handle lift in the range of .490 @.050 up to .550 @ .050 and these the way they are setup up will only work with a hydraulic roller or hydraulic flat tappet. but i did run these heads with a stock cam with no issues but it was for only about 250 miles till the car was rearended. if i remember right i paid almost 1500 for them plus the work looking to see if they are worth getting rid of. thanx
[ November 30, 2006, 10:44 PM: Message edited by: v-town coupe ]
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
Email this post to someone!
Printer friendly view of this Ford topic
