This is topic testing waters on a set of afr 185 cc heads in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=044469

---

Posted by v-town coupe (Member # 2771) on :
 
i did sell my short block now im gonna test the water with the heads i have a set of the smog legal afr cnc'd heads they are the 185cc heads with 58cc combustion chambers and have the 2.02/1.60 valves and accept the ped mount style rockers when i first got them i had them sent out to have the springs set up for cam shafts in the 218 deg of duration @ .050 up to about 230 deg of duration @.050 and handle lift in the range of .490 @.050 up to .550 @ .050 and these the way they are setup up will only work with a hydraulic roller or hydraulic flat tappet. but i did run these heads with a stock cam with no issues but it was for only about 250 miles till the car was rearended. if i remember right i paid almost 1500 for them plus the work looking to see if they are worth getting rid of. thanx

[ November 30, 2006, 10:44 PM: Message edited by: v-town coupe ]
 

---

Posted by v-town coupe (Member # 2771) on :
 
btw these are the heads that made 455hp out of a 10:1 302 with a comp xe282hr and a victor jr

heres the link

http://www.airflowresearch.com/185sbf_sh.php

http://www.airflowresearch.com/ford_dyno.php
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com