|
Author
|
Topic: Hit the 10's! (Video)
|
need-a-cage
¯
Member # 5415
|
posted
 
 
Well, I finally got the opportunity to run this thing out with the ET Streets on it. I still spun pretty bad in 1st on all my passes. I had to lift twice in 1st on every run and I was only launching at about 2500 RPM. Here are some videos.
You can probably tell from the video that my cousin was a little excited when he saw the ET.
Quickest
Follow up Run with only a little cool down.
2nd Quickest w/ 3.15 Pulley
Put the original Vortech 3.33 pulley on which dropped the boost to 11psi, pulled some timing, and added some fuel. It was also pretty hot.
Quickest with 3.33 Pulley
Craig
[ January 19, 2009, 05:55 PM: Message edited by: need-a-cage ]
--------------------
93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT
10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
Congrats Craig! ![[worship]](graemlins/worship.gif)
--------------------
R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
8stang8
¯
Member # 8082
|
posted
nice pass!
--------------------
Fox body coupe: 347, TKO, 3.73s, 9.93 @ 143
Posts: 1279 | From: s.f. | Registered: Dec 2007
| :
|
|
forced331
¯
Member # 1270
|
posted
Sweet runs! Congrats! And your smog legal! ![[Eek!]](eek.gif)
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
Nice run bud! Congrats again on getting into the 10's! ![[burnout]](graemlins/burnout.gif)
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
tgarlock
¯
Member # 8645
|
posted
Excellent runs! Congrats on the new best! I like the 2nd fastest vid where you whooped on that firebird, i think he lost to you, Drew and myself. He must have been frustrated losing to so many stangs.
Posts: 257 | From: Fremont, CA | Registered: Sep 2008
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
I hot lapped it two more times with the lower boost setup. My 60ft kept getting worse but it was pretty consistent.
After the 11.08 pass I ran 11.11 @ 125.02 mph with a 1.65 60ft and then I ran 11.16 @ 124.9 mph with a 1.686 60ft. I wish I could have gotten a mid 1.5 like I have at Infineon on a Wednesday. I might be able to get under a 1.5 during a weekend event at Infineon, but they would never let me back if I ran it out and went into the 10's.
Craig
--------------------
93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT
10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
awsome. It looks like I missed of those magical 2000 feet below sea level days in SAC. ![[Frown]](frown.gif) I was going to come down but mised it. Maybe soon.
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
It could have been better. It was in the mid 70's! I was hoping for mid 60's.
--------------------
93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT
10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
phat50
¯
Member # 1998
|
posted
Nice runs craig!
--------------------
New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
threethirty1
¯
Member # 7814
|
posted
Nice man! Ill be out there in june!
--------------------
1987 Black GT
factory zero option car
Posts: 777 | From: North Bay | Registered: Jul 2007
| :
|
|
iceman302
¯
Member # 7180
|
posted
Very nice! Congrats! That is a beautiful hatch. It reminds me a lot of my old '92.
--------------------
'65 Mustang Fastback
Posts: 4171 | From: Rancho Murieta | Registered: Oct 2006
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
double post
[ January 24, 2009, 11:49 PM: Message edited by: need-a-cage ]
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
quote:
Originally posted by need-a-cage:
[QUOTE]Originally posted by iceman302:
[qb] Very nice! Congrats! That is a beautiful hatch. It reminds me a lot of my old '92.
Thanks. I like how it doesn't look like a 10 second car. It surprises a lot of people.
[ January 24, 2009, 09:10 PM: Message edited by: need-a-cage ]
--------------------
93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT
10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
svfreerider87
¯
Member # 5748
|
posted
quote:
Originally posted by need-a-cage:
quote:
Originally posted by need-a-cage:
[QUOTE]Originally posted by iceman302:
[qb] Very nice! Congrats! That is a beautiful hatch. It reminds me a lot of my old '92.
Thanks. I like how it doesn't look like a 10 second car. It surprises a lot of people.
lose the pillar pod and you'll be completely sleeper. sick car.
--------------------
Dreamspeed Motorsports
Posts: 1685 | From: Sunnyvale | Registered: Jun 2005
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
Thanks. I would, but I like to see the boost and AFR. I just need to tint the windows darker. LOL
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
drop92
PITUDO
RACING 415
Member # 1323
|
posted
nice run!!!
Posts: 3422 | From: SF | Registered: May 2002
| :
|
|
Mach1Pony
¯
Member # 5435
|
posted
Your sisters Mustang looked more manly then yours. It looks like a car an old lady would be driving to go to bingo night... it's definately a sleeper! But if thats the look you're going for then you did a great job!
I'm just jealous because my Mach looks fast but only does mid 12.5's so my car is just the opposite... looks fast but it's slow!
Your cousin did a great job on the video, oh wait, that's me! I'll try to keep the excitement down next time. ![[Big Grin]](biggrin.gif)
-Ron
--------------------
2003 DSG Mach1 Mustang - 12.41 @ 109 mph
Posts: 54 | From: Petaluma | Registered: Mar 2005
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
Yep, that is exactly what I was going for. This way when someone pulls up next to me and thinks they are quicker because they have a hood scoop they will be in for a big surprise. Unless it is Josh!
I don't know, Ron, I don't think Cari's white 90 GT with the black bra on it and sitting at stock height on 15's looked very "manly."
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
Mach1Pony
¯
Member # 5435
|
posted
quote:
Originally posted by need-a-cage:
Yep, that is exactly what I was going for. This way when someone pulls up next to me and thinks they are quicker because they have a hood scoop they will be in for a big surprise. Unless it is Josh!
I don't know, Ron, I don't think Cari's white 90 GT with the black bra on it and sitting at stock height on 15's looked very "manly."
They both look girly, hers just looked a little less girly! (ha, ha)
Let's get it right, it's not a hood scoop, it's a Shaker baby! It's attached to the engine not the hood... that's way more intimidating! Well I guess Josh has his attached to the hood but that's besides the point.
--------------------
2003 DSG Mach1 Mustang - 12.41 @ 109 mph
Posts: 54 | From: Petaluma | Registered: Mar 2005
| :
|
|
StreakMatt
¯
Member # 6257
|
posted
Congrats on breaking the 10 sec. barrier ![[patriot]](graemlins/patriot.gif) ..I knew your car had the ability to do it with the right tires and you running it all out. Throw a 2.95 pulley on there on you'll see 10.5-10.6's @ 131 or so. What RPM do you shift at? With a 2.95 and 6.87 crank and 6200 shift point you would be at 49813.32 impeller speed. The S-trims are rated to 50,000 so that would be maxing it out.
--------------------
Custom Blue '88 GT: Garage Built= MM&FF January 2012 Cover and Feature. Tuned by Bob Kurgan
Black '03 Cobra: 2.9 Whipple Tuned by Bob Kurgan
Posts: 1198 | From: Sacramento | Registered: Nov 2005
| :
|
|
welch93lx
¯
Member # 8748
|
posted
u have clean ass LX. it sound sick as fuck when u shift..
Posts: 705 | From: modesto | Registered: Nov 2008
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
Awsome run! and the car looks very clean.
--------------------
HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother.
04/24/87 - 11/23/2012
90 lx 347 RIP
86 gt
89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
what exhaust set up do you have?
--------------------
HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother.
04/24/87 - 11/23/2012
90 lx 347 RIP
86 gt
89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
Not a very good one!
Well, the headers are good quality but they are just shorties.
JBA 1 5/8 unequal shorty headers.
Mac 2 1/2 inch offroad H-pipe.
Mac 2 1/2 tailpipes with their Flowpath mufflers.
If you want to hear it better, I can try to add an old video tomorrow of a slower run from Infineon.
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
