|
Author
|
Topic: My 331 build , I'm done! *update*
|
VENOMUS PONY 5.0
¯
Member # 7785
|
posted
 
 
Hey jay it's moe that thing is looking real clean bro I know you are hella excited I'll see you around it.. Thanks for the covers...
--------------------
If You Want More Inches - Stroke It!!!
Mystery stang in the works..
Posts: 1602 | Registered: Jul 2007
| :
|
|
1RaW03SvT
¯
Member # 9151
|
posted
looks great!!!!
![[Big Grin]](biggrin.gif) ![[patriot]](graemlins/patriot.gif)
--------------------
2003 SoNiC BlUe CoBrA
BUILT
Posts: 2159 | From: *SVTaDDicT* | Registered: May 2009
| :
|
|
SVT-DROP
CAFords OG
Member # 1736
|
posted
Nice work Jason
Posts: 249 | From: Bay Area | Registered: Aug 2002
| :
|
|
turbo50
¯
Member # 6700
|
posted
This bucket running yet??
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
SnakeBit
¯
Member # 8871
|
posted
Yup! I have a appointment for tomorrow over at Nextgen for the tune.
[ July 29, 2011, 09:51 PM: Message edited by: SnakeBit ]
--------------------
91 Coupe full M/M suspension
Maier WideBody
331 356 RWHP 357 RWTQ
Tuned by TPS MotorSports
Posts: 2707 | From: Fremont | Registered: Jan 2009
| :
|
|
DIRTY SALLY
¯
Member # 7845
|
posted
Jason your not winning
--------------------
---------
Savage Habits
instagram @2cheezen
Posts: 9145 | Registered: Aug 2007
| :
|
|
Boss 327
¯
Member # 9143
|
posted
wow. looks really good. cant wait to see this thing on the track.
--------------------
"You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito
Posts: 1789 | From: East Bay | Registered: May 2009
| :
|
|
GTCONV86
¯
Member # 5385
|
posted
J YOUR ENGINE AND ENG BAY LOOK SWEET.GREAT WORK.ROBERT FROM S.J.HOPE TO SEE YOU RUN AT THE TRACK SOON.AWESOME WORK.
Posts: 158 | Registered: Feb 2005
| :
|
|
SSF 50
¯
Member # 7219
|
posted
very nice lookin!!... where did u get the intake plate from? i got 1 but its a little 2 wide 2 bolt the fuel lines on...
--------------------
Never Ending List of 50z!!
"BAY AREA STUNNAZ"
Dude that 5.0 is not a 5.0 no way bro. It has to have a diff motor.
Posts: 2458 | From: SSF | Registered: Nov 2006
| :
|
|
SnakeBit
¯
Member # 8871
|
posted
quote:
Originally posted by SSF 50:
very nice lookin!!... where did u get the intake plate from? i got 1 but its a little 2 wide 2 bolt the fuel lines on...
Intake plate? Are you referring to the intake spacer that goes between the upper and lower?
--------------------
91 Coupe full M/M suspension
Maier WideBody
331 356 RWHP 357 RWTQ
Tuned by TPS MotorSports
Posts: 2707 | From: Fremont | Registered: Jan 2009
| :
|
|
Camara90
1%
Member # 134
|
posted
quote:
Originally posted by SnakeBit:
quote:
Originally posted by SSF 50:
very nice lookin!!... where did u get the intake plate from? i got 1 but its a little 2 wide 2 bolt the fuel lines on...
Intake plate? Are you referring to the intake spacer that goes between the upper and lower?
Think he means the lift plate you used to stab the motor.
--------------------
92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans.
std. 356hp, 350tq
11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
turbo50
¯
Member # 6700
|
posted
His neighbor made it.
U put down ur desired 340hp at the wheels with that tiny cam and intake jay?
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
SnakeBit
¯
Member # 8871
|
posted
quote:
Originally posted by turbo50:
His neighbor made it.
U put down ur desired 340hp at the wheels with that tiny cam and intake jay?
It doesn't look like I'm going to make it. He is still tuning trying to get me a few more night now I'm at 302hp and 355tq
--------------------
91 Coupe full M/M suspension
Maier WideBody
331 356 RWHP 357 RWTQ
Tuned by TPS MotorSports
Posts: 2707 | From: Fremont | Registered: Jan 2009
| :
|
|
CornOil_&_Boost
¯
Member # 5888
|
posted
quote:
Originally posted by SnakeBit:
quote:
Originally posted by turbo50:
His neighbor made it.
U put down ur desired 340hp at the wheels with that tiny cam and intake jay?
It doesn't look like I'm going to make it. He is still tuning trying to get me a few more night now I'm at 302hp and 355tq
what type of dyno do they have?
--------------------
https://www.facebook.com/pushrodpoweredmustangs
'95 Cobra - small engine / small turbo -
'02 Excursion 7.3 - tow vehicle
'14 - Chevy Volt - DD
Posts: 5097 | Registered: Jul 2005
| :
|
|
SnakeBit
¯
Member # 8871
|
posted
quote:
Originally posted by C6Z06s_own_50Deep:
quote:
Originally posted by SnakeBit:
quote:
Originally posted by turbo50:
His neighbor made it.
U put down ur desired 340hp at the wheels with that tiny cam and intake jay?
It doesn't look like I'm going to make it. He is still tuning trying to get me a few more night now I'm at 302hp and 355tq
what type of dyno do they have?
They have a Dyno Jet. They use SCT and Diablo.
--------------------
91 Coupe full M/M suspension
Maier WideBody
331 356 RWHP 357 RWTQ
Tuned by TPS MotorSports
Posts: 2707 | From: Fremont | Registered: Jan 2009
| :
|
|
CornOil_&_Boost
¯
Member # 5888
|
posted
quote:
Originally posted by SnakeBit:
quote:
Originally posted by C6Z06s_own_50Deep:
quote:
Originally posted by SnakeBit:
quote:
Originally posted by turbo50:
His neighbor made it.
U put down ur desired 340hp at the wheels with that tiny cam and intake jay?
It doesn't look like I'm going to make it. He is still tuning trying to get me a few more night now I'm at 302hp and 355tq
what type of dyno do they have?
They have a Dyno Jet. They use SCT and Diablo.
torque is there...must be the cam and intake holding it back...you've got a lot of power just waiting to be unraveled..
--------------------
https://www.facebook.com/pushrodpoweredmustangs
'95 Cobra - small engine / small turbo -
'02 Excursion 7.3 - tow vehicle
'14 - Chevy Volt - DD
Posts: 5097 | Registered: Jul 2005
| :
|
|
Camara90
1%
Member # 134
|
posted
quote:
Originally posted by C6Z06s_own_50Deep:
quote:
Originally posted by SnakeBit:
quote:
Originally posted by C6Z06s_own_50Deep:
quote:
Originally posted by SnakeBit:
quote:
Originally posted by turbo50:
His neighbor made it.
U put down ur desired 340hp at the wheels with that tiny cam and intake jay?
It doesn't look like I'm going to make it. He is still tuning trying to get me a few more night now I'm at 302hp and 355tq
what type of dyno do they have?
They have a Dyno Jet. They use SCT and Diablo.
torque is there...must be the cam and intake holding it back...you've got a lot of power just waiting to be unraveled..
Agreed, but if it will r good for your application run it. Setup must have peaked low with all that runner length. I would for starters take off the intake spacer, and go to a smaller valve cover that can fit without it.
--------------------
92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans.
std. 356hp, 350tq
11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
turbo50
¯
Member # 6700
|
posted
So is it an official RIP????
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
SnakeBit
¯
Member # 8871
|
posted
quote:
Originally posted by turbo50:
So is it an official RIP????
Yeah we are just waiting on the final word from the insurance company. It has taken a while. I'm looking for a clean Fox Body roller if you know of any. There is one on here, not sure if it sold yet but I'll jump on it as soon as I get the final word.
--------------------
91 Coupe full M/M suspension
Maier WideBody
331 356 RWHP 357 RWTQ
Tuned by TPS MotorSports
Posts: 2707 | From: Fremont | Registered: Jan 2009
| :
|
|
trickflow211
¯
Member # 8503
|
posted
quote:
Originally posted by SnakeBit:
Ok so I finally finished up today and turned the key. Motor sounds good and drives very smooth. I'll post up a Quick video tomorrow. Here are some pics of the motor complete. Thanks again to Dan "Turbo50", you da man!
Shit looks real good man!
Happy for u and glad to see ur back n runnin !
That thing is bouta rip !!
Turbo 50 for president !!
--------------------
1990 Cobra Clone 421 Tq 420 Hp
Need General Contractor Services? 925-338-5422 serving East Bay Area over 20yrs
Posts: 2449 | From: Pittsburg/Sacramento | Registered: Jul 2008
| :
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
quote:
Originally posted by trickflow211:
quote:
Originally posted by SnakeBit:
Ok so I finally finished up today and turned the key. Motor sounds good and drives very smooth. I'll post up a Quick video tomorrow. Here are some pics of the motor complete. Thanks again to Dan "Turbo50", you da man!
Shit looks real good man!
Happy for u and glad to see ur back n runnin !
That thing is bouta rip !!
Turbo 50 for president !!
You should maybe examine his sig and the last post a little closer.
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
trickflow211
¯
Member # 8503
|
posted
quote:
Originally posted by 50DADDY:
quote:
Originally posted by trickflow211:
quote:
Originally posted by SnakeBit:
Ok so I finally finished up today and turned the key. Motor sounds good and drives very smooth. I'll post up a Quick video tomorrow. Here are some pics of the motor complete. Thanks again to Dan "Turbo50", you da man!
Shit looks real good man!
Happy for u and glad to see ur back n runnin !
That thing is bouta rip !!
Turbo 50 for president !!
You should maybe examine his sig and the last post a little closer.
Haha my bad I thought he just redid all this after the incident already ! Sorry bout that !
--------------------
1990 Cobra Clone 421 Tq 420 Hp
Need General Contractor Services? 925-338-5422 serving East Bay Area over 20yrs
Posts: 2449 | From: Pittsburg/Sacramento | Registered: Jul 2008
| :
|
|
blkfoxbody89
5.O
Member # 8361
|
posted
This motor will be beastly in a coupe/LX. Instead of a pig of a SN95 platform! Although the SN interior is superior look wise, its cramped with that huge dash.
Hopefully you got more ponies out of it. Torque was good but hp matched my mild 302 -10-20hp.. Def a bottleneck somewhere (cam, or intake, or both as stated)
Good luck on your search!
MikeN
--------------------
'89 gt
'90 gt
Posts: 976 | From: sacramento | Registered: Apr 2008
| :
|
|
Krz88lx
¯
Member # 4261
|
posted
My old 331 made 325hp 360tq also tuned at nextgen.
I had Edelbrock rpm intake/tfs1cam/30lbs injectors/long tubes
--------------------
Krz4rd5
Posts: 1286 | From: san jOse | Registered: Mar 2004
| :
|
|
turbo50
¯
Member # 6700
|
posted
quote:
Originally posted by Krz88lx:
My old 331 made 325hp 360tq also tuned at nextgen.
I had Edelbrock rpm intake/tfs1cam/30lbs injectors/long tubes
cam was holding you back.
Snakebits car has a cobra intake and a crane 2031 cam.....and out of the box eddie e streets......weak sauce but 355ft/lbs of torque at the wheels..........
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
