|
Author
|
Topic: LS1 or 03' -04' cobra swap
|
NastyFastNotch
¯
Member # 8230
|
posted
 
 
So...ive done all there is to do with a 302 and im bored now. Im looking to drop either an LS1 or Cobra swap in my 90' notchback. Any suggestions, specs, horror storys??? let me know what you guys think, cost is not an issue just practicality, power and reliability.
thanks
btw lets keep the clawing to a minimum ladies, if u dont like someones opinion, start your own thread about it
Posts: 550 | From: The Island City Alameda | Registered: Feb 2008
| :
|
|
90FoX
FoX
Member # 1974
|
posted
is this a serious post or what? ![[Roll Eyes]](rolleyes.gif)
Posts: 5364 | From: Shooting Skeet | Registered: Oct 2002
| :
|
|
Robb
¯
Member # 9444
|
posted
ls1 would be cool and different
Posts: 2467 | From: Sacramento,CA | Registered: Sep 2009
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote:
Originally posted by 90FoX:
is this a serious post or what?
Its like saying "should I be gay or straight"
MAS PUTO
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18528 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
90FoX
FoX
Member # 1974
|
posted
the answer is simple follow this guideline and all will be well:
If your gay and like men, put in a ls1.
If your not gay and like women, put a ford motor in a ford.
![[Embarrassed]](redface.gif)
[ December 09, 2010, 03:56 AM: Message edited by: 90FoX ]
Posts: 5364 | From: Shooting Skeet | Registered: Oct 2002
| :
|
|
Nastysvt
¯
Member # 6431
|
posted
Dont listen to everyone else. if u wanna go fast, go with whatever you really want and is the cheapest to do. 347 w/n20, 03-04 cobra swap w/blower, Built LS2 or LS3 w/n20 would be my choices. all those are guaranteed 11 sec. set ups
--------------------
Built 98 Cobra
Built C6 Z06
Daily TBSS
Posts: 2575 | From: Valley to the Bay | Registered: Jan 2006
| :
|
|
5LiterSpeeder
¯
Member # 8234
|
posted
Termi motor would be siiiick. My buddy lives in Texas and he says at a local once a month car show there, there is a dude with a turboed 03/04 cobra swapped notchback that is f**kin bad ass. So my vote for sure.
--------------------
93'Ex 4cyl Notch TFS H/C/I 3.55s 4 wheel Cobra brakes, V2-SQ, 14 psi
RIP BRANDON, SILVERLX-
Posts: 561 | From: Healdsburg | Registered: Feb 2008
| :
|
|
99 blue bird
¯
Member # 10367
|
posted
quote:
Originally posted by BladeX10:
ls1 would be cool and different
its actually a very common swap. alot of people put 5.3l in them too cuz u can find them for 500 bucks complete. im putting a 6.0 LS motor in a notch aswell. its very easy to have a 10 second notch if u put a ls1 or bigger into your notch op. just would need a cam and headers and a few minor things.
--------------------
99 Trans Am
69 Pontiac Firebird
Posts: 169 | From: 707 | Registered: Oct 2010
| :
|
|
|
|
venomous99
¯
Member # 1917
|
posted
skip the mustang platform altogether..
a crazy idea ive been considering is picking up a 93 or 94 rx7 w/ an ls1 or better conversion.
light car with a pretty damn stout motor.
--------------------
MKII Q7
89LX
Posts: 4811 | From: dc | Registered: Oct 2002
| :
|
|
Luke87GT
Lay'n more stripes
than Caltrans
Member # 21
|
posted
quote:
Originally posted by venomous99:
skip the mustang platform altogether..
a crazy idea ive been considering is picking up a 93 or 94 rx7 w/ an ls1 or better conversion.
light car with a pretty damn stout motor.
Pics? Also what does it weigh?
Posts: 7802 | From: San Mateo | Registered: Jul 2000
| :
|
|
venomous99
¯
Member # 1917
|
posted
quote:
Originally posted by Luke87GT:
quote:
Originally posted by venomous99:
skip the mustang platform altogether..
a crazy idea ive been considering is picking up a 93 or 94 rx7 w/ an ls1 or better conversion.
light car with a pretty damn stout motor.
Pics? Also what does it weigh?
here is one from socal for under 12k. it needs some minor attention cosmetically and on smog to get it where id b happy.
-------------------
-factory stock 15K mile 2002 F-body LS1 and T56 with CAGS delete and lowered fan activation temperatures done via HP Tuners. Factory programming is otherwise untouched.
-Hinson subframe mounts and bump steer correction
-2 ½” mandrel-bent true dual exhaust system using factory F-body cats, Edelbrock stainless mufflers
-3.90 rear end
-stock functioning power steering
-AFCO aluminum radiator
-SPAL 2360cfm puller fan
-custom made 4” cold air intake with K&N filter
-Aeromotive A1000-6 fuel pressure regulator with braided SS lines
-bin mounted battery, behind driver, 0 gauge cables
-Lokar throttle cable
-new pillow ball bushings
-the sale includes a replacement dash and glove box all in excellent condition to replace the gauge-relieved dash that you see in the pics
-sale includes a full set of Carbotech Bobcat brake pads, never installed
-all of the gauges and electronics work other than what is described below
In addition to the paint deficiencies noted above, here are some other items that I want to disclose:
-needs new tires
-speedo not connected
-A/C is not connected (I never installed a condenser after the swap), the LS1 still has the compressor installed
-missing rear divider and strut tower bar (I cannot find these items and I have looked everywhere???…assume they are missing). The driver’s side armrest lid is missing and the pillar post upholstery has been cut.
-ABS dash light is flashing, have never looked into this
-MIL is on – this is due to EVAP tank pressure sensor not being connected. I never deleted this code as I had intended to use all of the factory EVAP sensors. This is an easy code delete if one desires.
-the factory Mazda oil pressure sender has quit working (just like all the others…) since I first did the conversion. I have recently verified that the LS1 is running 50+ psi at idle via a mechanical gauge.
-the hatch is either from a non-touring car, or a previous owner ran a spoiler which I do not have
-the posts for the headlight pop up switch appear to have broken (see pic) on the backside of the dash surround. The headlights operate perfectly through the regular column switch.
-the car is NOT smog-legal in California and there is no BAR sticker. It is currently non-op’d and there are no fees due at the DMV. AFAIK, a single exhaust, EVAP tank pressure, AIR, stock air intake and a Corvette FPR are all that would be required to get through a BAR referee, but I haven’t really looked into this in greater detail.
In summary, this is a turn-key, running , driving car that is a plain Jane conversion with a low mileage drivetrain and a really nice exhaust system using factory cats which will make a smog-legal conversion easy to do, if one desires. The engine and transmission have never been seperated, I have literally never turned a bolt on the intake or exhaust manifolds, accessories, etc. Drive it as is, or build it as you see fit. I have disclosed the car’s condition, features and defects to the best of my knowledge. There are more than 60 pictures posted at http://www.flickr.com/photos/48294349@N05/sets/72157623602431508/. Price is $11,900.
========================
at that price i dont think u can find a better deal but the reality is you'd probably spend another 3-5k to finish it up which then makes is another "project" lol. ive talked myself out of this project many times already and have decided to pass for something either completed or that "other" car ive always wanted.
rx7's are about 2600lbs stock so w/ the ls1 maybe its +200lbs which will throw off the 50/50 weigh ratio.
[ December 09, 2010, 11:04 AM: Message edited by: venomous99 ]
--------------------
MKII Q7
89LX
Posts: 4811 | From: dc | Registered: Oct 2002
| :
|
|
|
|
FRC_Kid
¯
Member # 8940
|
posted
the new 4v 5.0 would be nice..
--------------------
Pretend Racecar Driver- C5 FRC
Ford, GM, & Dodge is what I'm all about
Posts: 2578 | From: All over the Peninsula | Registered: Feb 2009
| :
|
|
NastyFastNotch
¯
Member # 8230
|
posted
quote:
Originally posted by venomous99:
skip the mustang platform altogether..
a crazy idea ive been considering is picking up a 93 or 94 rx7 w/ an ls1 or better conversion.
light car with a pretty damn stout motor.
my buddy in hayward has 1993 rx7 with a built LS2 h/c/i and that thing hauls ass!!! almost scary
Posts: 550 | From: The Island City Alameda | Registered: Feb 2008
| :
|
|
SIC9250
¯
Member # 8216
|
posted
quote:
Originally posted by cali95gt:
the new 4v 5.0 would be nice..
![[worship]](graemlins/worship.gif)
--------------------
Coyote_Mach1
Posts: 6959 | From: in the drivers seat. | Registered: Feb 2008
| :
|
|
1SloSVT
¯
Member # 9548
|
posted
keep the mustang with a 302 in and buy an old school chevy if you want to do a LS swap
Posts: 46 | From: 510/415 | Registered: Oct 2009
| :
|
|
90fox5.0
¯
Member # 9338
|
posted
quote:
Originally posted by BladeX10:
ls1 would be cool and different
+1 supercharged ls1 would bee nice ![[patriot]](graemlins/patriot.gif)
--------------------
1989 LX DROP
1997 Svt Cobra (SOLD)
2000 SS Camaro (SOLD)
Posts: 1827 | From: South sacramento | Registered: Jul 2009
| :
|
|
Pumpkin_Notch
TEAM PLATINUM
Member # 3946
|
posted
quote:
Originally posted by SIC9250:
quote:
Originally posted by cali95gt:
the new 4v 5.0 would be nice..
you said money is not a worry so this would be perfect
keep it ford powered
--------------------
TEAM PLATINUM
87LX: T-TOP PUMPKIN NOTCH
94N.C.F.GT: 418w
www.facebook.com/PLATINUM1320tv
Posts: 2790 | From: RICHMOND/sanpablo | Registered: Dec 2003
| :
|
|
venomous99
¯
Member # 1917
|
posted
quote:
Originally posted by NastyFastNotch:
quote:
Originally posted by venomous99:
skip the mustang platform altogether..
a crazy idea ive been considering is picking up a 93 or 94 rx7 w/ an ls1 or better conversion.
light car with a pretty damn stout motor.
my buddy in hayward has 1993 rx7 with a built LS2 h/c/i and that thing hauls ass!!! almost scary
man...i want one. too bad th
e ones i see for sale locally are overpriced given whats needed to finish them up and the ls1/t56 combo. an ls2 rx7 is insane.
--------------------
MKII Q7
89LX
Posts: 4811 | From: dc | Registered: Oct 2002
| :
|
|
90fox5.0
¯
Member # 9338
|
posted
Just like my sig said built ford tough with chevy stuff ![[Big Grin]](biggrin.gif)
--------------------
1989 LX DROP
1997 Svt Cobra (SOLD)
2000 SS Camaro (SOLD)
Posts: 1827 | From: South sacramento | Registered: Jul 2009
| :
|
|
SLOWBACK 67
¯
Member # 6348
|
posted
Why not build a 351 stroker and call it a day?
--------------------
Originally posted by turbo50:
I have no intenions of keeping anyones parts or taking anyones money.
Posts: 8582 | From: Vallejo | Registered: Dec 2005
| :
|
|
|
|
510cpskid
¯
Member # 8277
|
posted
damn cafords is gonna have more tranni's than sf
--------------------
old set up
92 coupe 100 wet nx 410's mickey t's
new set up
?
Posts: 1015 | From: fremont | Registered: Mar 2008
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote:
Originally posted by Slowback67:
Why not build a 351 stroker and call it a day?
U mean a 351w?
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18528 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
