|
Author
|
Topic: 1.7 rocker arm question....
|
Camaro Kid Z/28
¯
Member # 3100
|
posted
 
 
since clevelands use the 1.72 rocker arm with trunions...has anyone tried using these on the 302's with any problems? i was thinking of putting these on for a low-buck upgrade?! your thoughts everyone? thanks for your time.
Ernesto
--------------------
1973 Camaro Z/28(clone)
http://www.cardomain.com/ride/2649130
"4-eyes forever essay!"
Posts: 6432 | From: 408 | Registered: Jul 2003
| :
|
|
a50sn95
¯
Member # 527
|
posted
Good Question. I honestly don't know the answer, but I've never heard of it being done. Since the "335" series is canted valve, I kind of doubt it. My guess is that they are too wide to fit next to each other in an inline configuration.
It's been a few years since I've seen 351C rockers, but they did seem very wide.
Anyway, if you have some, someone has to have a head off a car you can try them on....
Posts: 226 | From: Galt | Registered: Nov 2001
| :
|
|
Camaro Kid Z/28
¯
Member # 3100
|
posted
quote:
Originally posted by a50sn95:
Good Question. I honestly don't know the answer, but I've never heard of it being done. Since the "335" series is canted valve, I kind of doubt it. My guess is that they are too wide to fit next to each other in an inline configuration.
It's been a few years since I've seen 351C rockers, but they did seem very wide.
Anyway, if you have some, someone has to have a head off a car you can try them on....
hmmm good point on the wideness of the rockers! i ll have to check into that! ![[Confused]](confused.gif) thanks! ![[patriot]](graemlins/patriot.gif)
--------------------
1973 Camaro Z/28(clone)
http://www.cardomain.com/ride/2649130
"4-eyes forever essay!"
Posts: 6432 | From: 408 | Registered: Jul 2003
| :
|
|
BlownNOSMustang
¯
Member # 158
|
posted
I have a 1993 302 Hatch. I have the Crane 1.7 rollers They work fine. I have had them for 10 years.
Posts: 238 | From: Cow Town,USA. | Registered: Feb 2001
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
quote:
Originally posted by BlownNOSMustang:
I have a 1993 302 Hatch. I have the Crane 1.7 rollers They work fine. I have had them for 10 years.
10 years ago when you got them were they originally sold for cleveland engines?
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
