Author
|
Topic: 2/8 resultz
|
JoeT
¯
Member # 298
|
posted
Ridiculously packed, slower than the worst grudge night. 3 runs and I had to sneak around the cones to get the last one in. I never touched the timing (would like to verify, but it should be 16 BTDC), and the fuel pressure I couldn't really touch because my driving was too inconsistant I did end up around roughly 32 PSI (vac off) for every pass. About to do a post-mortem to determine exactly... also, got weighed on the triple beam. The electronic scale seemed to have issues turning on those that know what I weighed be quiet about it
#1 spanked by an LS1 (him 12.4 @ 113) 60' 1.913 1/8 8.155 @ 88.531 1/4 12.561 @ 111.211
#2 spanked a 12.9 POS gen 2 maro 60' 1.800 1/8 7.945 @ 89.167 1/4 12.342 @ 111.784
hot lapped her to a: granny shifted it too when I saw the 1.6x hit the board I didn't want to blow it #3 60' 1.699 1/8 7.736 @ 89.284 1/4 12.125 @ 112.925
looks like my cyber combo is becoming a reality! [ February 08, 2003, 06:42 PM: Message edited by: shade-tree ]
-------------------- 1984 Ford Tempo AOD--- RIP
Posts: 6785 | From: San Jose | Registered: Jun 2001
| :
|
|
Stimson
_
Member # 51
|
posted
Sweet deal! So you never got to line up with Fasterdamnit? You two should be a great race to watch! Looks like he has to reach into his magic hat and pull out two more tenths now.
ps- PM me your weight. The only trick I found in turning on that scale is having to plug in the power cord
ps ps- Anderson cams have been running around these parts for almost half a decade now. Before cyber-combos existed even
Posts: 2373 | Registered: Jun 2000
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
Sac. was really busy today!!....I'm gonna post JDUB07's and J30282's time like I said I would...
JDUB07 best time of 2.1 60ft/13.955 @100.13 Great run considering it was his first trip down the 1320 and how stock his motor is...
J30282 best time of 2.3 60ft/14.818 @ 93.199 Pretty good run for him too..It was also his first 1320 run..He was having problems with traction and consistant 60ft's times
Congrats on those times guy's!! ......Maybe next time my car will be runnin [ February 08, 2003, 06:49 PM: Message edited by: Black94 5.0 ]
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
Stimson
_
Member # 51
|
posted
Rob- what's JDUB07's combo?
Posts: 2373 | Registered: Jun 2000
| :
|
|
jmcclesk
Moderator
Member # 1355
|
posted
Shade-tree please pm me on your weight. DAMN you and jim are getting TOO close for my likeing. I am doing too much side work to be able to work on my car. its a shame to because i have the parts to pull about 70-80lbs off the car and add 10-15 hp. maybe i will call in sick a few days this week
-------------------- Ford trained ASE master tech.
Posts: 4024 | From: marrysville | Registered: May 2002
| :
|
|
JoeT
¯
Member # 298
|
posted
quote: Originally posted by st5150: Sweet deal! So you never got to line up with Fasterdamnit? You two should be a great race to watch! Looks like he has to reach into his magic hat and pull out two more tenths now.
bah, he did reach into his bag it's a lot closer than you might think (waiting for him to post it).
And Jon, you better knock at least another tenth off. I'm coming for ya
-------------------- 1984 Ford Tempo AOD--- RIP
Posts: 6785 | From: San Jose | Registered: Jun 2001
| :
|
|
PeNiNsula302
¯
Member # 1061
|
posted
Whos thunderbird was that supercharged on cobra r's, that thing was LOUD .
Posts: 3423 | Registered: Mar 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
quote: Originally posted by PeNiNsula302: Whos thunderbird was that supercharged on cobra r's, that thing was LOUD .
I HATE that damn car. Somone buy that guy a muffler!
-------------------- AED
1994 GT Bucket that will likely never run 1999 SLOLEEN Twin Turbo Coyote 2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
Let me ask you guys what I should post as my best run on skinnies
first of all my first run sucked butt
13.851 @97.581 W/ 2.094 60ft
Second run 13.746@101.947 W/ 2.022 60ft.
Third I set a MPH record for my car 13.858@102.679 W/2.069 60ft. I was soooo stoked after that run!!!
My last run I was like freak this I am going to just slam this thing!(well atleast more then I have before haha) 13.500@98.448MPH W/ 1.900 60ft.
Man it felt so good and then I mess up and hold out 3rd too long!!! It was an easy 103MPH run. but I really don't know what one to post as my best?????
-------------------- AKA Franky Freaking 5 liter
Advanced Engine Development SCT dealer Dynotuning Engine building 916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
Stimson
_
Member # 51
|
posted
98slowhoe- what is your combo?
Posts: 2373 | Registered: Jun 2000
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
quote: Originally posted by st5150: 98slowhoe- what is your combo?
It's in the SIG man. Except I ran 90gt's skinnies today.
-------------------- AKA Franky Freaking 5 liter
Advanced Engine Development SCT dealer Dynotuning Engine building 916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
Stimson
_
Member # 51
|
posted
Impressive for stock heads and cam! What does your car weigh?
Posts: 2373 | Registered: Jun 2000
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
quote: Originally posted by st5150: Rob- what's JDUB07's combo?
C&L 76mm, 65mm TB, Stock panel type K&N, 3.55's, Dynomax 2.5"cat back,FMS headers, FMS crank and wp U/drive-pullies(no alt). Electric fan
JDUB07 LX wieghts 3350lbs with him in the car!
Everything else is stock..Even a stock H-pipe with fully functioning cats and 225/60/15 street radials on "Ten Holes" 2.1 60ft/13.955 @ 100.13
Sounds like a good race for you, Sawson! [ February 08, 2003, 09:59 PM: Message edited by: Black94 5.0 ]
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
quote: Originally posted by st5150: Impressive for stock heads and cam! What does your car weigh?
3320 with me in it. I think with Drew behind the whell it has a 13.3xx@104.xx with a 1.8xx 60ft. Yeah but I am pretty impressed with the car. Stock pullies, stock MAF, and 90gt always gets on me about not having a K&N filter.
-------------------- AKA Franky Freaking 5 liter
Advanced Engine Development SCT dealer Dynotuning Engine building 916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
quote: Originally posted by Black94 5.0: quote: Originally posted by st5150: Rob- what's JDUB07's combo?
C&L 76mm, 65mm TB, Stock panel type K&N, 3.55's, Dynomax 2.5"cat back,FMS headers, FMS crank and wp U/drive-pullies(no alt). Electric fan
JDUB07 LX wieghts 3350lbs with him in the car!
Everything else is stock..Even a stock H-pipe with fully functioning cats and 225/60/15 street radials on "Ten Holes" 2.1 60ft/13.955 @ 100.13
Sounds like a good race for you, Sawson!
Hey Rob it was good meeting you out there! See you around man!
-------------------- AKA Franky Freaking 5 liter
Advanced Engine Development SCT dealer Dynotuning Engine building 916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
98slowhoe....Yeah it was good fun!..I cant wait to get my '94 runnin and bring it back to the track!.....
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
quote: Originally posted by Black94 5.0: 98slowhoe....Yeah it was good fun!..I cant wait to get my '94 runnin and bring it back to the track!.....
yeah we'll have to run them heads up and see who is the better driver hahaha!
-------------------- AKA Franky Freaking 5 liter
Advanced Engine Development SCT dealer Dynotuning Engine building 916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
My01Stang
¯
Member # 1044
|
posted
Great seeing all of you out there. It's always nice to have a BIG Mustang showing Hope to see some of you at the track soon. Wednesday?
-------------------- In the Garage: 2003 Ford Crown Vic 2004 Harley Heritage Softail Classic 2006 Ford F150 Lariat
Posts: 321 | From: Summerville, SC | Registered: Mar 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
I'll be there on wed. Maybe with the stick tires?
-------------------- AED
1994 GT Bucket that will likely never run 1999 SLOLEEN Twin Turbo Coyote 2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
My01Stang
¯
Member # 1044
|
posted
If the rain holds out, I'll be there. Still going to working on that 60FT See you out there Drew.
-------------------- In the Garage: 2003 Ford Crown Vic 2004 Harley Heritage Softail Classic 2006 Ford F150 Lariat
Posts: 321 | From: Summerville, SC | Registered: Mar 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
quote: Originally posted by My01Stang: If the rain holds out, I'll be there. Still going to working on that 60FT See you out there Drew.
Elwin, maybe you want to race my "13 second car" power adder to power adder?
-------------------- AED
1994 GT Bucket that will likely never run 1999 SLOLEEN Twin Turbo Coyote 2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
quote: Originally posted by My01Stang: If the rain holds out, I'll be there. Still going to working on that 60FT See you out there Drew.
Yeah I need to cut that 1.900 60ft consistant!!! I hope it holds out too. I bet it will, but that would mean no TNT on Sat.
-------------------- AKA Franky Freaking 5 liter
Advanced Engine Development SCT dealer Dynotuning Engine building 916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
My01Stang
¯
Member # 1044
|
posted
Drew, It would be fun. Last time we raced you walked me down a little ole lady driving a PINTO:) I still remember that night like yesterday. Maybe we can match up together. It would be a great race. You trying to catch up to my tail lights
-------------------- In the Garage: 2003 Ford Crown Vic 2004 Harley Heritage Softail Classic 2006 Ford F150 Lariat
Posts: 321 | From: Summerville, SC | Registered: Mar 2002
| :
|
|
My01Stang
¯
Member # 1044
|
posted
Just kidding Drew, You are one hell of a driver.
-------------------- In the Garage: 2003 Ford Crown Vic 2004 Harley Heritage Softail Classic 2006 Ford F150 Lariat
Posts: 321 | From: Summerville, SC | Registered: Mar 2002
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
OK, let me get this out of the way-
Shade -Tree.
Hard as I tried, I got to watch from the tower as he had a tire spinning 1.699 60 ft. When I saw the 1/8th mph, I said "Oh, ....- he's going to beat the best run I just ran 2 minutes ago." Sure enough, he did. And with traction, he will drop that 60 ft.
So-
Run 1
1.80 60 ft. 7.90 at 88.99 12.32 at 112.138
R2
1.79 7.90 88.55 12.35 110.8
hot lap R3
1.76 7.80 89.10 12.23 111.97
R4
1.74 7.76 89.77 12.16 112.614
Clutch slipping on ALL launches. Seems the new ET Streets (26x10.5) hook really well, more than my worn out clutch can take. Last launch was off the rev limiter. With the slipping, it is a very smooth launch. So, now I have to come up w/ a clutch. Any recommendations? I want lo 1.6 60 ft.'s (at least).
JL
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|