|
Author
|
Topic: My 96 GT LS swap build thread..ITS ALIVE!!!
|
coupe5oh
¯
Member # 10411
|
posted
 
 
I know, I know, why didn't I just build a Ford engine? Because this is something I've wanted to do for awhile and finally have the time/funds to do it. Street ability is not really a factor in this build since I have a daily driver but, it will definetly be drivin to local meets/cars and coffee. Here we go..
Bought the car in the first week of January from a friend who recently did a P.I. swap with MMR ported heads, Comp cams, 4.10s, and longtubes. Fixed a couple little things that the car needed done and got it running the way I like it. Upgraded the cooling system with a aluminum radiator and helped it breathe better with a JLT C.A.I and a sct tuner.
How it looked when I got it (my old red sn95 in the back)
Got some new wheels
First round of Mods was full TeamZmotorsports rear suspension with the relocated uppers, double adjustable lowers, Strange adjustable rear shocks, stock v8 springs with one coil cut (upgrading to the TeamZ drag spring soon), Torque Box reinforcements, and a NX plate kit.
This is where the fun begins...
Got the car back from the first round of mods, got it allligned, drove it around for a week or 2(never got to spray the 2v) then i decided it's now or never and parked the car to get ready for the tear down. Spent a day getting all the stuff out the way for the engine/ trans to come out. Finally got some help from a friend a couple weeks later, had the engine and trans almost out then found out the Longtubes were hitting on the kmember so we ended up dropping the k-member and the rest of the front suspension (since it's allgetting replaced anyways). During the time I was getting the engine ready I was also getting all the parts ready to assemble the front suspension.
TeamZ LSX swap k-member kit, 12/175 coil over springs, Strange adjustable struts, MM bumpsteer kit, flaming river quick ratio manual rack, new hubs with extended studs, got the spindles drilled for the bumpsteer kit and painted them.
Picked up a low mile 5.3 LM7(basically a slightly smaller LS1 but iron block) and began the Disassembly of everything. Plans for the engine are custom cam, ported 243 heads, ls6 intake, and atleast a 150 shot of nitrous with a th400 with a stall, trans brake, and RMVB. Currently the engine is down to a short block getting cleaned/ prepped for paint. While this is being done I'm also removing all the A/c and hydroboost stuff so I can clean the engine bay and start tucking the body harness.
more updates soon!
[ 2016-02-07, 10:16 AM: Message edited by: coupe5oh ]
--------------------
R.I.P Willie Guzman (5ltrsvt)
96 4.6- H/C/I 5.3 LS swap
95 5.0- SOLD
94 5.0- SOLD
Posts: 2288 | From: Hayward | Registered: Oct 2010
| :
|
|
19mystic96
¯
Member # 7553
|
posted
great build! looking forward to the progress. you're going to upset a lot of people here, but I'm sure you know that already.
PM me if you have any questions. Ive done one before.
--------------------
1996 Mystic cobra #32
Posts: 1287 | From: Pacifica | Registered: Apr 2007
| :
|
|
coupe5oh
¯
Member # 10411
|
posted
quote:
Originally posted by 19mystic96:
great build! looking forward to the progress. you're going to upset a lot of people here, but I'm sure you know that already.
PM me if you have any questions. Ive done one before.
Thanks! You have a swapped mystic right? Lx James sent me a pic of your car when I first started..
--------------------
R.I.P Willie Guzman (5ltrsvt)
96 4.6- H/C/I 5.3 LS swap
95 5.0- SOLD
94 5.0- SOLD
Posts: 2288 | From: Hayward | Registered: Oct 2010
| :
|
|
SIC9250
¯
Member # 8216
|
posted
Badass setup she should haul ass no doubt..6spd would make the car even sweeter ![[burnout]](graemlins/burnout.gif)
--------------------
Coyote_Mach1
Posts: 6959 | From: in the drivers seat. | Registered: Feb 2008
| :
|
|
19mystic96
¯
Member # 7553
|
posted
quote:
Originally posted by coupe5oh:
quote:
Originally posted by 19mystic96:
great build! looking forward to the progress. you're going to upset a lot of people here, but I'm sure you know that already.
PM me if you have any questions. Ive done one before.
Thanks! You have a swapped mystic right? Lx James sent me a pic of your car when I first started..
yea, thats me. lol
you'll love the end result!
what trans are you installing? any mods to the motor?
[ 2015-07-08, 09:38 PM: Message edited by: 19mystic96 ]
--------------------
1996 Mystic cobra #32
Posts: 1287 | From: Pacifica | Registered: Apr 2007
| :
|
|
coupe5oh
¯
Member # 10411
|
posted
quote:
Originally posted by 19mystic96:
quote:
Originally posted by coupe5oh:
quote:
Originally posted by 19mystic96:
great build! looking forward to the progress. you're going to upset a lot of people here, but I'm sure you know that already.
PM me if you have any questions. Ive done one before.
Thanks! You have a swapped mystic right? Lx James sent me a pic of your car when I first started..
yea, thats me. lol
you'll love the end result!
what trans are you installing? any mods to the motor?
It's up there in first post but I'm doing ported 243s, custom cam, ls6 intake, and a 150 shot..gonna use a th400 with a stall,trans brake, and RMVB
--------------------
R.I.P Willie Guzman (5ltrsvt)
96 4.6- H/C/I 5.3 LS swap
95 5.0- SOLD
94 5.0- SOLD
Posts: 2288 | From: Hayward | Registered: Oct 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
![[patriot]](graemlins/patriot.gif)
--------------------
91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
75 chevy
¯
Member # 6717
|
posted
Nice! Great build.... May I ask.. why a 327? If I was going to do a 327. I would probably go the turbo route. Make sure the internals will rev to 9k-10k. Like an old school 327. What is your long term goal(s)?
Posts: 1917 | From: california | Registered: Apr 2006
| :
|
|
92 LS Coupe
¯
Member # 13890
|
posted
Nice setup what are you hoping to put out as far as HP & FT LB of torque? I have a 2015 GMC Sierra with a 5.3
--------------------
1992 Notchback coyote swap
1992 Notchback
1966 Mustang Coupe
Posts: 136 | From: Bay Area | Registered: Dec 2014
| :
|
|
coupe5oh
¯
Member # 10411
|
posted
quote:
Originally posted by 92 LS Coupe:
Nice setup what are you hoping to put out as far as HP & FT LB of torque? I have a 2015 GMC Sierra with a 5.3
atleast 400 on motor + at least a 150 shot
quote:
Originally posted by 75 chevy:
Nice! Great build.... May I ask.. why a 327? If I was going to do a 327. I would probably go the turbo route. Make sure the internals will rev to 9k-10k. Like an old school 327. What is your long term goal(s)?
Went with the 5.3 cause the iron block will handle all the nitrous im gonna throw at it longer than a aluminum LS1 will.. it only makes 5-10 HP less than a stock LS1 but it weighs about 60# more. But, once I blow this up im gonna stroke a 6.0 LQ9 and throw a turbo on it.
--------------------
R.I.P Willie Guzman (5ltrsvt)
96 4.6- H/C/I 5.3 LS swap
95 5.0- SOLD
94 5.0- SOLD
Posts: 2288 | From: Hayward | Registered: Oct 2010
| :
|
|
Blow_U_In_Reverse
¯
Member # 12298
|
posted
Chuck Norris does NOT approve this swap!! Haha jk.. nice project bro.. cant wait to see the end result! Definitely gonna be something different..
--------------------
"Real Men Get BLOWN"
-1993 Cobra "COBRUUH"
-1984 T-Top Notchback
#KurganTuned
Posts: 2688 | From: FiJi-925-650 | Registered: Aug 2012
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
quote:
Originally posted by 75 chevy:
Nice! Great build.... May I ask.. why a 327? If I was going to do a 327. I would probably go the turbo route. Make sure the internals will rev to 9k-10k. Like an old school 327. What is your long term goal(s)?
Say wat?
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
NvrGoFullRetard
CAFords OG
Member # 1633
|
posted
Not to be negative. But. Your 400hp on motor will not happen with the combo you said.maybe 330 especially going threw a turbo 400
--------------------
"formally 4.6 eatin gm's"
white 97gt n/a 320rwhp/325rwtq
01 sierra rcsb lsx 408 (murdered out)
03 ecsb sierra 6.0 on 22's
2011 Tahoe
Posts: 2759 | From: PITTSBURG/FAIRFIELD | Registered: Aug 2002
| :
|
|
BTLD GT
¯
Member # 5229
|
posted
quote:
Originally posted by NvrGoFullRetard:
Not to be negative. But. Your 400hp on motor will not happen with the combo you said.maybe 330 especially going threw a turbo 400
is this from personal experience or hear say. i personally know of a stock long block lm7 with cam lt's and intake that makes 380 rwhp through a 4500 stall turbo 400. so 400 is a possibility with ported heads. just my .02 cents
Daniel
--------------------
2000 Cobra R
Posts: 558 | From: livermore | Registered: Jan 2005
| :
|
|
92_5.0
¯
Member # 7624
|
posted
I'm looking forward to seeing this swap
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
92_5.0
¯
Member # 7624
|
posted
quote:
Originally posted by hurting your feelings:
quote:
Originally posted by 75 chevy:
Nice! Great build.... May I ask.. why a 327? If I was going to do a 327. I would probably go the turbo route. Make sure the internals will rev to 9k-10k. Like an old school 327. What is your long term goal(s)?
Say wat?
Isn't the 5.3 a 323 not a 327?
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
NvrGoFullRetard
CAFords OG
Member # 1633
|
posted
Its a 325cid. And they came with 295 fly wheel hp.so your talking 250 maybe to the wheels. Then you add stock ported heads, custom cam and longtubes and cai. Im gonna guess 330 to 350 rwhp and your going thru a turbo 400 instead of a 4l60e that will rob u less hp.
Im defiantly not being a hater. If you can do it let me in on the secret. Keep us updated
--------------------
"formally 4.6 eatin gm's"
white 97gt n/a 320rwhp/325rwtq
01 sierra rcsb lsx 408 (murdered out)
03 ecsb sierra 6.0 on 22's
2011 Tahoe
Posts: 2759 | From: PITTSBURG/FAIRFIELD | Registered: Aug 2002
| :
|
|
Black 02 SS
¯
Member # 5939
|
posted
He said 400hp, but not 400 wheel horse. Not sure if that's what he meant or not. I made roughly 320whp on a 5.3 with an off the shelf 224 cam, LS6 intake, stock 5.3 heads, and long tubes through a 4L60E. If he goes more aggressive on the cam with ported heads I'd assume 350-370whp is doable.
--------------------
Schwinn 18speed
Posts: 949 | From: East Bay | Registered: Aug 2005
| :
|
|
KARATExxCHUCK
¯
Member # 12851
|
posted
As long as it is not a honda build, I am excited to see how it turns out Pete. I'm still powdercoating, just to let you know.
Good luck with the build. Keep posting pics and progression.
Charles
--------------------
**Sometimes you must kill the snake to walk the path!!
**Message me for Powder Coating and Sand blasting!!!:)
Posts: 1286 | Registered: Apr 2013
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
bout god dam time lol, good on you, heh im also in full effect for the mm stuff now
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|
POWERED BY FORD
¯
Member # 9204
|
posted
quote:
Originally posted by NvrGoFullRetard:
Its a 325cid. And they came with 295 fly wheel hp.so your talking 250 maybe to the wheels. Then you add stock ported heads, custom cam and longtubes and cai. Im gonna guess 330 to 350 rwhp and your going thru a turbo 400 instead of a 4l60e that will rob u less hp.
Im defiantly not being a hater. If you can do it let me in on the secret. Keep us updated
It's a ls bruh
[ 2015-07-11, 12:58 PM: Message edited by: POWERED BY FORD ]
Posts: 2204 | Registered: May 2009
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
.
[ 2015-07-12, 04:24 PM: Message edited by: Pure Stang ]
--------------------
HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother.
04/24/87 - 11/23/2012
90 lx 347 RIP
86 gt
89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
19mystic96
¯
Member # 7553
|
posted
little off topic, but you wouldn't happen to be getting rid of the AC lines, would you?
[ 2015-07-13, 09:05 PM: Message edited by: 19mystic96 ]
--------------------
1996 Mystic cobra #32
Posts: 1287 | From: Pacifica | Registered: Apr 2007
| :
|
|
coupe5oh
¯
Member # 10411
|
posted
quote:
Originally posted by 19mystic96:
little off topic, but you wouldn't happen to be getting rid of the AC lines, would you?
Yes I am..shoot me a text 5103298918
--------------------
R.I.P Willie Guzman (5ltrsvt)
96 4.6- H/C/I 5.3 LS swap
95 5.0- SOLD
94 5.0- SOLD
Posts: 2288 | From: Hayward | Registered: Oct 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
quote:
Originally posted by BTLD GT:
quote:
Originally posted by NvrGoFullRetard:
Not to be negative. But. Your 400hp on motor will not happen with the combo you said.maybe 330 especially going threw a turbo 400
is this from personal experience or hear say. i personally know of a stock long block lm7 with cam lt's and intake that makes 380 rwhp through a 4500 stall turbo 400. so 400 is a possibility with ported heads. just my .02 cents
Daniel
hear say lol and it runs 9.8's
--------------------
91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
