T O P I C R E V I E W
|
Autumnstang97
Member # 6111
|
posted
Hello all,
My brother recently acquired a 1996 Mustang GT convertible. He brought it over to have me check some things out and I discovered a code on the car. It's throwing a P0308-cylinder 8 misfire. I went ahead and pulled the gauge cluster off only to discover the CEL bulb was removed. Put a new on it and we can now see the CEL illuminate.
I went ahead and replaced all the spark plugs and spark plug wires, and the two coil packs. All Motorcraft parts. I reset the code and after a week, my brother advised me the light is back on. Rechecked the code and it's the same P0308 misfire on cylinder 8.
What would be the NEXT step to repair this misfire?
|
93ex chp
Member # 9016
|
posted
Maybe a bad injector or crank position sensor..
|
Autumnstang97
Member # 6111
|
posted
I read that somewhere so I may go ahead and do those and see where it goes. Thanks.
|
Martinna
Member # 12493
|
posted
Pull out the #7 plug and see if it looks like the #8. Crooked of the seller to pull out the CEL bulb before selling it.
|