T O P I C R E V I E W
|
kuku93
Member # 14014
|
posted
So today I installed my exhaust stock one for now along with new O2 sensors. Before all this the car ran and turned on every time. But when I installed it to keep my stoker quiet. It doesn't want to turn on. I know my timing isn't set right and I'm guessing it could be that. Or when I installed the exhaust something happened. Before the exhaust it was just open headers. Idk what happened but any info can help. Thank you!
|
SLWST50
Member # 11113
|
posted
Did you install a mid pipe with cats? The material in the converters can dislodge and get stuck sideways causing serious back pressure. Also, I have broken many spark plugs while installing/removing headers and not noticed till I had a problem.
|
kuku93
Member # 14014
|
posted
quote: Originally posted by SLWST50: Did you install a mid pipe with cats? The material in the converters can dislodge and get stuck sideways causing serious back pressure. Also, I have broken many spark plugs while installing/removing headers and not noticed till I had a problem.
Yea I did. I put the stock exhaust on for now. That was my guess about the back pressure because I'm not running any smog air pump or emissions. My other guess is when I plugged the sensors in and maybe my car is running rich or lean for it not to turn on.
|
Martinna
Member # 12493
|
posted
Having your timing too far advanced will make your car hard to start. An advantage of a chip is it can keep your stock timing at startup and only advance it at parts of the curve where you need it.
|