T O P I C R E V I E W
|
kuku93
Member # 14014
|
posted
So I'm doing this build on a 347 stroker. Mainly for canyon runs and track. This is my first build and wanted to ask any export experience human being that tire size and rim size are good on a 1987 foxbody mustang
|
Martinna
Member # 12493
|
posted
A lot of work here and not just one answer. For canon runs you'll need a 5 lug disk conversion. If you do a disc conversion, you should put bigger discs in the front. Then there is the booster saga. Depending on the rear axles you go with you'll need different offset wheels. You'll need to roll your fender lips.
|
kuku93
Member # 14014
|
posted
I have the conversion kit and front 5 lug spindles. But still looking for a shop to install my goodies for the rearend.
|
Blow_U_In_Reverse
Member # 12298
|
posted
For canyon runs try 255 front and 275 rear.. ran that in my IRS swapped 82 chp and the car took corners like a dream.. make sure you get the proper alignment as well though!
|
kuku93
Member # 14014
|
posted
Thank you
|