T O P I C R E V I E W
|
bigbowen1
Member # 13168
|
posted
i have a 2003 cobra leaking oil from the pin hole/weep hole on the under side of the oil cooler. does anyone know what to do, ford doesnt make the oil coolers any more and i have had a lot of trouble finding anything aftermarket to delete or swap the cooler. any suggestions??
|
dohcfox
Member # 12829
|
posted
You can buy a oil filter relocation kit and use braided hose to relocate the filter and run a aftermarket air to oil cooler. Then make a hose up from bends from other hoses. Or try ebay for a used one. Just be cautious they have pancake alunimum fins inside fhat catch and hold lots of metal. So if it's from a blown up motor it could be full of metal. Ither way flush it out well before install
|
bigbowen1
Member # 13168
|
posted
Do you suggest any aftermarket oil cooler kits to use? Basically I'm looking at a 5-600$ fix?? Do all of these cobras have this problem?
|
BTLD GT
Member # 5229
|
posted
One of two things will fix this. First check to see If the threads the oil filter screws onto are loose I think it's a 12mm Allen if not remove the insert from the oil cooler and replace the oring. I've seen this many times, the threads come loose from multiple oil changes.
Daniel
|
1SICK86
Member # 8619
|
posted
Man not to shur but on my 96 cobra I just took out my oil cooler and put in a 03 GT oil filter adapter but I would look in too it bfor I do it mine had water in The cooling system which was a big problem to get out of my cooling jackets still trying to get oil out myself think it's simpler to the 03/04cobra anyone correct me if I'm wrong ....
|
dohcfox
Member # 12829
|
posted
No 03 04 cobra the alternator is in the way of the lower hose. The lower hose has to go in very low
|
bigbowen1
Member # 13168
|
posted
quote: Originally posted by BTLD GT: One of two things will fix this. First check to see If the threads the oil filter screws onto are loose I think it's a 12mm Allen if not remove the insert from the oil cooler and replace the oring. I've seen this many times, the threads come loose from multiple oil changes.
Daniel
Where do I get the o rings that would need to be replaced? I don't think ford carries them
|