T O P I C R E V I E W
|
93ex chp
Member # 9016
|
posted
Looking for a good street strip turbo that will hold up to 1,000hp and has good warranty on it..not strictly drag but will see track from time to time and weekend/daily driven..looking for t76 or bigger.thanks
|
racsirx
Member # 1710
|
posted
Precision PT8847
|
RONIN
Member # 9987
|
posted
In a street car you want make sure to keep the A/R ratio below .96 anything above and you will experience major turbo lag.
|
5.0 LsX
Member # 10017
|
posted
what displacement motor? what trans? gears?
|
93ex chp
Member # 9016
|
posted
Lee..that's the turbo your going with in the new set up?
|
93ex chp
Member # 9016
|
posted
5.0 LSx...I have 302,c4,342gears
|
5.0 LsX
Member # 10017
|
posted
i think you would be happy with a 76mm and .96ar exh
|
racsirx
Member # 1710
|
posted
quote: Originally posted by 93ex chp: Lee..that's the turbo your going with in the new set up?
I might get it but I am looking into a custom turbo right now, maybe a 91mm turbo. Its a good 88mm turbo for the street and can hit 1000hp without pushing it too hard with a 302 based motor, a 76mm turbo can get you to a 1000hp also but you will have to push it hard and will need to worry about running Meth injection or an air to water intercooler to keep air temps down, that's why I sold my 76mm turbo. [ March 19, 2012, 07:48 PM: Message edited by: racsirx ]
|
93ex chp
Member # 9016
|
posted
I was looking into the that precision turbo..would I see turbo lag with that 88mm?
|
racsirx
Member # 1710
|
posted
Not much difference than a 76mm, it's a T-4 flange with a .96 A/R
|
93ex chp
Member # 9016
|
posted
Ok..what about the gtk 850 or 1000 turbo? Is that any good? And how much better is the ball bearing turbo vs the pt8847? [ March 20, 2012, 04:13 PM: Message edited by: 93ex chp ]
|
93 twintrbo
Member # 10475
|
posted
I would not recommend a turbonetics product. Seen too many failures. I would highly recommend a precision turbo or borg warner turbo. look into the Precision CEA 7175. Been proven to 1000whp and will spool super fast on a v8.
|
93ex chp
Member # 9016
|
posted
Ok..yeah I'm leaning toward the precision turbo or getting one custom to my set up.
|
84SVOrick
Member # 9039
|
posted
what 302 block can hold 1000hp?
|
svfreerider87
Member # 5748
|
posted
quote: Originally posted by 84SVOrick: what 302 block can hold 1000hp?
boss 302 or a dart.
|