T O P I C R E V I E W
|
joser90coupe
Member # 2785
|
posted
HOW CAN I GET THE CENTER CAPS ON THE FRONT WHEELS OF A FOX BODY?
|
joser90coupe
Member # 2785
|
posted
ANYBODY??
|
91Trunkster
Member # 6598
|
posted
It sounds like your 5 Lug conversion was done with Lincoln Rotors and if that is the case the caps will not fit unless you go with SN95 parts.
|
wickedstang
Member # 7692
|
posted
True.. True...
|
Eddie510-
Member # 2354
|
posted
i dont think you have to go sn95 just to fit that cap. Some friends had bullits and can fit the caps in front with lincoln rotors with a little modification, but i dont know if you can do it with the cobra r wheel
|
1bdpone
Member # 6708
|
posted
You need the SN95 setup to correctly fit the center caps on your fox body. I've been down that road this last winter. You will gain a better turning radius on top of the center caps fitting if you go with the SN95 setup.
|
nextuloose03
Member # 7680
|
posted
i ran spacers on my. i think they were 3/8 spacer [ July 19, 2007, 12:38 AM: Message edited by: nextuloose03 ]
|
joser90coupe
Member # 2785
|
posted
Thanx guys but I still have stock 4 lug set up and i try putting 1/8 spacers but the caps still don't stay becuase of the dust cap.
|
nextuloose03
Member # 7680
|
posted
quote: Originally posted by joser90coupe: Thanx guys but I still have stock 4 lug set up and i try putting 1/8 spacers but the caps still don't stay becuase of the dust cap.
o yeah, i took off the dust cap
|
joser90coupe
Member # 2785
|
posted
But isn't it nesscery to keep the dust caps on?
|
HI-OUTPUT
Member # 2249
|
posted
use a spacer just enough, use short bulge lug bolts.
if you dont have enough thread get longer wheel studs pressed in your stock rotors (Moroso #46180 or #46220)
if you take off your dust cap you need to grind the spindle just enough
|
racercosmo
Member # 1864
|
posted
quote: Originally posted by joser90coupe: But isn't it nesscery to keep the dust caps on?
Your wheel is a big dust cap.
|