T O P I C R E V I E W
|
Curt
Member # 6254
|
posted
I got a flat...in the rain, and when I went to jack up the car, I saw a tab right below the a-pillar, right behind the wheelwell, on my CRX and my 240sx this was the jack point...apparently not on the 5.0
The fender is bent out now an sticking away from the body, about an inch. did i just mess up the fender or is there a mounting point I bent? [ November 15, 2006, 04:26 AM: Message edited by: Curt ]
|
925five.0
Member # 3292
|
posted
some pics would help out.
|
98slowhoe 'FIFTYLX'
Member # 895
|
posted
Like he said pics would be the best. I do know that Les Schwabs did that to my car too. All I can say is I was yelling a screaming and cussing out anybody that was in front of me. Long story for another time. My paint is kinda custom so I didn't want to re shoot it. What I did was loosen the bottom fender screws, the middles ones in the door jam and had some friends push in the middle as I tightened the screws. I actually played with it some more after that and got it to line back up pretty well. I would try that out first. You might be able to push it back. But mine wasn't cresed or had any marks from it so I got real lucky.
|
Curt
Member # 6254
|
posted
the fender is rusty anyway, what im worried about is the mounting point, its sticking up right where the moulding is
|
98slowhoe 'FIFTYLX'
Member # 895
|
posted
Get some pics up atleast.
|
Curt
Member # 6254
|
posted
k
|
Curt
Member # 6254
|
posted
|
98slowhoe 'FIFTYLX'
Member # 895
|
posted
yeah try to re-adjust the with the mounting screws that I told you about. Thats about how mine looked. You should be able to get it pretty close.
|
Curt
Member # 6254
|
posted
so the mounting points are OK? im hoping i just messed upm the fender and not a chassis piece
Thanks for the help!
|