T O P I C R E V I E W
|
82COUPE50
Member # 5570
|
posted
I have 1982 Ford Mustang 5.0 4spd manual and I want to put in a 5spd.,My question is if I can I put a 94-95 T-5 into mine? Any Knowledge will be helpful, thanks!
|
Hatchback Pony
Member # 3292
|
posted
i think u need one from a fox. the shaft on the sn95s are a bit longer.
|
94gt
Member # 3060
|
posted
The input shaft is 1 inch longer, so is the bellhousing. I believe it should work if you get the 94-95 specific bellhousing.
Either that, or change the input shaft to a fox spec.
|
82COUPE50
Member # 5570
|
posted
thanks!
|
50DADDY
Member # 3076
|
posted
It works fine as long as you use the 94-95 bellhousing.
|
acmikee
Member # 5568
|
posted
you can spot a 94-95 bellhousing because it will be stamped 5.0 on the top.......
|
50DADDY
Member # 3076
|
posted
It also has a lot more vents.
|
luvmy5.0
Member # 6699
|
posted
the input shaft is 5/8 inch longer to position the shifter in the right place in the 94+ interior...just look for a fox t5
|
66 InjectedCobra
Member # 819
|
posted
The trans will be back further and may not line up w/ the shifter hole in the body...
|
8850GT
Member # 5909
|
posted
if you use the 94 95 bell it will be in the right position no matter what.
|
82COUPE50
Member # 5570
|
posted
Other than the 94 T5 and the bellhousing what other parts do I need to make my conversion possible?
|
8850GT
Member # 5909
|
posted
www.moderndriveline.com
some helpful stuff there!
|