|
Author
|
Topic: 94-95 T-5
|
|
|
925five.0
¯
Member # 3292
|
posted
 
 
i think u need one from a fox. the shaft on the sn95s are a bit longer.
Posts: 559 | From: -925- | Registered: Sep 2003
| :
|
|
94gt
¯
Member # 3060
|
posted
The input shaft is 1 inch longer, so is the bellhousing. I believe it should work if you get the 94-95 specific bellhousing.
Either that, or change the input shaft to a fox spec.
--------------------
2020 Explorer ST
2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
It works fine as long as you use the 94-95 bellhousing.
--------------------
"Im not stupid,i just act that way so i dont make you dummies uncomfortable."
"Old age and treachery shall overcome youth and skill."
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
acmikee
¯
Member # 5568
|
posted
you can spot a 94-95 bellhousing because it will be stamped 5.0 on the top.......
Posts: 241 | From: fremont | Registered: Apr 2005
| :
|
|
50DADDY
CAFords OG
Member # 3076
|
posted
It also has a lot more vents.
--------------------
"Im not stupid,i just act that way so i dont make you dummies uncomfortable."
"Old age and treachery shall overcome youth and skill."
Posts: 4827 | From: Suckramento | Registered: Jul 2003
| :
|
|
ChrisS
¯
Member # 6699
|
posted
the input shaft is 5/8 inch longer to position the shifter in the right place in the 94+ interior...just look for a fox t5
Posts: 632 | From: Dallas Texas | Registered: Apr 2006
| :
|
|
|
|
RED@7kVERT *8850GT*
¯
Member # 5909
|
posted
if you use the 94 95 bell it will be in the right position no matter what.
--------------------
02 Z06-11.0 @ 132 1.9 60'
_ _ _ _ _ ____ _ _ _ _ _
Sold:05 CTS-V-13.1@114
Sold:01 Cobra Vert-12.0@119
Posts: 2432 | From: -916- | Registered: Aug 2005
| :
|
|
|
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
![[patriot]](graemlins/patriot.gif)
