T O P I C R E V I E W
|
phat50
Member # 1998
|
posted
what size you think this is?
[ May 17, 2006, 06:33 PM: Message edited by: phat50 ]
|
Red00GT
Member # 5653
|
posted
since its an anderson imma guess a 4" powerpipe
|
LuvMy04GT
Member # 4791
|
posted
quote: Originally posted by Red00GT: since its an anderson imma guess a 4" powerpipe
Me too.
|
Hungry Hippo
Member # 537
|
posted
their n/a pipes are 3.5", but you could have measured it in less time than it took to make a post [ May 12, 2006, 08:55 PM: Message edited by: Hungry Hippo ]
|
AJBlackGT
Member # 3936
|
posted
quote: Originally posted by Hungry Hippo: their n/a pipes are 3.5", but you could have measured it in less time than it took to make a post
Some, of their n/a pipes are 3.5", but that one is their 4" version.
|
phat50
Member # 1998
|
posted
dose there 3.5 look like this one? would a 4" fit on a 70mm throttlebody? [ May 17, 2006, 06:36 PM: Message edited by: phat50 ]
|
66 InjectedCobra
Member # 819
|
posted
Thats a 4" hose and piping. It has a 90mm Throttle body
|
phat50
Member # 1998
|
posted
in the picture thats a 80mm throttlebody and 4" power pipe, wondering if that 4" pipe would fit on a 70mm throttlebody?
|
66 InjectedCobra
Member # 819
|
posted
Ben 4" equals about 90mm. An 80mm TB would even be on the small size when compared to the hose.
You can get silicone hoses w/ steps built it. I have one here that goes from 3" to 4". The smaller side goes on the TB and the larger side goes on the power pipe
Call me Bro I will get you the number and web link for the guys I got the trick hose from.
...Mike
|