T O P I C R E V I E W
|
23boy5.0
Member # 5511
|
posted
wanna buy these heads, need ta know if its too much for my setup right now. ( edelbrock performer intake, 70mm edelbrock tb and spacer, cold air intake, bbk headers, bbk x-pipe, electric flex fan, 3-core radiator) the specs on these heads are: 2.05 /1.60 stainless swirl polished valves, 210cc intake runner. 60cc chambers 3/8" screw in studs & guide plates Hi Performance springs (.550 lift hyd roller) let me know thanks [ April 04, 2006, 06:14 AM: Message edited by: 23boy5.0 ]
|
23boy5.0
Member # 5511
|
posted
oh and should i change out the stock injectors?
|
92stangLX
Member # 3252
|
posted
I assume you have a stock 302? If that's the case then they probably are too much. I would go with a set of TFS heads or Edelbrocks instead if you are planning on keeping it a mild street car.
If you do decide to get these heads you will definitely need to check P to V clearance and yes you should change your injectors.
|
FasterDamnit
Member # 442
|
posted
Tri-Po???
Where did you find these? More Ebay chinese crap?
|
mustanggt5091
Member # 444
|
posted
quote: Originally posted by FasterDamnit: Tri-Po???
Where did you find these? More Ebay chinese crap?
+1
|
23boy5.0
Member # 5511
|
posted
quote: Originally posted by FasterDamnit: Tri-Po???
Where did you find these? More Ebay chinese crap?
HAHAHA, yep. im not getting them tho. But here is the link to em: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8051928567&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
|