T O P I C R E V I E W
|
CobramanPhil
Member # 2170
|
posted
Which intake/cam for:
393w ported TW TFS heads Daily driver=Yes Dragstrip car=NO Roadcourse car=5% of the time (which means once every two months or so) vortech at around 14lbs Smog=YES Racegas=NO TweecerRt controlled=YES
Just planning..planning..and more planning..probably in a couple of months [Smile] Your guy's opinons matter and will help [worship]
Thanks for any info guys... [ January 20, 2006, 05:26 PM: Message edited by: CobramanPhil ]
|
2stangs69-91
Member # 1951
|
posted
I would try the trick flow R box series intake. Not cheap but I think it would work well for you. I have not looked but a XE comp blower grind cam in the 290 duration range would sound nice and really make some power. JMO good luck [ January 20, 2006, 07:41 AM: Message edited by: 2stangs69-91 ]
|
a50sn95
Member # 527
|
posted
Smog legal, the Holley has to be tops. You really need more, but there's nothing legal. Get a custom cam, just make sure you tell them it needs to pass a SMOG. Or, you can just swap it all out every two years....
|
NO MANRZ
Member # 566
|
posted
That sounds like a serious motor if the heads are ported right. With all that money you're spending, go with a custom cam. See what cam grinder the faster guys on the drag racing fastest ford list use and go with them. There are one or two shops that a lot of them use but I forget their names.
|