T O P I C R E V I E W
|
NEIGHT
Member # 8741
|
posted
So I'm in need of some machining work like decking N possibly porting heads N get my intake ported to match that. I'm looking for anything near me with reasonable prices.
|
v-town coupe
Member # 2771
|
posted
one memeber here, I think it was HYFLODS, is in SF and does port work.
|
cali95gt
Member # 8940
|
posted
Turbo50 swears by Dave's engine machine in Newark.... I trust him and they did all the work to my cylinder heads... Plus they are one of few shows to convert pedestal mount to stud mount rockers...
|
blown doors off
Member # 10713
|
posted
quote: Originally posted by v-town coupe: one memeber here, I think it was HYFLODS, is in SF and does port work.
+1 for Dave HYFLOHDS does great work
|
macthizzle
Member # 3492
|
posted
Step your game up 351 or better
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by macthizzle: Step your game up 351 or better
Don't worry my long term plan will be a dart 351 maybe with a good amount of boost!
|
JUNKYARD5.0
Member # 10398
|
posted
Have you tried Jim's Machine Shop in Redwood Toby with the S2000 does decent work at cool price, I think he's by fair oaks somewhere.
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by JUNKYARD5.0: Have you tried Jim's Machine Shop in Redwood Toby with the S2000 does decent work at cool price, I think he's by fair oaks somewhere.
Any ideas on price? Ever had them machine something for u?
|
2T0NE
Member # 4216
|
posted
daves machine ftw
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by 2T0NE: daves machine ftw
Heard they were good. Know if they are busy like it'll take long to get my stuff done kinda quick?
|
2T0NE
Member # 4216
|
posted
quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: daves machine ftw
Heard they were good. Know if they are busy like it'll take long to get my stuff done kinda quick?
they are the best, but it also depends on what your looking to get, bore .30 over cleaning ,honing and assembly etc. [ June 25, 2012, 10:53 PM: Message edited by: 2T0NE ]
|
Secnd2nun64
Member # 1431
|
posted
quote: Originally posted by NEIGHT: quote: Originally posted by macthizzle: Step your game up 351 or better
Don't worry my long term plan will be a dart 351 maybe with a good amount of boost!
Save your money for that!
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by 2T0NE: quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: daves machine ftw
Heard they were good. Know if they are busy like it'll take long to get my stuff done kinda quick?
they are the best, but it also depends on what your looking to get, bore .30 over cleaning ,honing and assembly etc.
All I need is to get my heads N intake ported N to be decked or whatever its called to make shure they're flat.
|
2T0NE
Member # 4216
|
posted
quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: daves machine ftw
Heard they were good. Know if they are busy like it'll take long to get my stuff done kinda quick?
they are the best, but it also depends on what your looking to get, bore .30 over cleaning ,honing and assembly etc.
All I need is to get my heads N intake ported N to be decked or whatever its called to make shure they're flat.
im sure they can handle that,but just so you know once you do that your heads and intake will only work with each other,meaning you cant seperate them or change them ,meaning u cant swap intakes or or vice versa,but you will solid fully ported
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by 2T0NE: quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: daves machine ftw
Heard they were good. Know if they are busy like it'll take long to get my stuff done kinda quick?
they are the best, but it also depends on what your looking to get, bore .30 over cleaning ,honing and assembly etc.
All I need is to get my heads N intake ported N to be decked or whatever its called to make shure they're flat.
im sure they can handle that,but just so you know once you do that your heads and intake will only work with each other,meaning you cant seperate them or change them ,meaning u cant swap intakes or or vice versa,but you will solid fully ported
I thought you could always get another intake ported to match?
|
2T0NE
Member # 4216
|
posted
quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: quote: Originally posted by NEIGHT: quote: Originally posted by 2T0NE: daves machine ftw
Heard they were good. Know if they are busy like it'll take long to get my stuff done kinda quick?
they are the best, but it also depends on what your looking to get, bore .30 over cleaning ,honing and assembly etc.
All I need is to get my heads N intake ported N to be decked or whatever its called to make shure they're flat.
im sure they can handle that,but just so you know once you do that your heads and intake will only work with each other,meaning you cant seperate them or change them ,meaning u cant swap intakes or or vice versa,but you will solid fully ported
I thought you could always get another intake ported to match?
yea you could, but when you deck the heads you shave a bit off depending on how much u shave off ofcourse you mite have to machine the intake aswell on top of that you raise the compression a bit.shit if u dont shave much off you mite be ok,but im not a expert ...call a shop they will explain better
|
NEIGHT
Member # 8741
|
posted
So decking is getting the heads to be flat or is it something else? I'd be happy with them being flat with light port N intake to match
|
QuarterHorse
Member # 11882
|
posted
Dave's Engine Machine all the way. If they mill a large amount from head surface they will have to mill the intake as well to match. They milled and port matched my intake, heads and 1 3/4's headers. Awesome job bringing my 64cc chamber Dart heads down to a 58cc chamber, but then you need a deeper fly cut in the piston. You should at minimum check them out. Talk to Angie, Dave's daughter. She may surprise you. If there to pricey for you. Check out Hubbards Machine off of Meekland in Hayward. Very well priced machine work & honest people, Jimmie does the head work there.
|
Camara90
Member # 134
|
posted
what heads are they? Whatt CC are they at now? Do they need to be taken down?
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by Camara90: what heads are they? Whatt CC are they at now? Do they need to be taken down?
They're the same heads as yours.
|
Marks93
Member # 11130
|
posted
Correct me if I'm wrong but I think Neight wants his heads only resurfaced (and ported), not milled.
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by Marks93: Correct me if I'm wrong but I think Neight wants his heads only resurfaced (and ported), not milled.
Well you might be right if that's what it's called to get them nice N flat to be ready to go on.
|
QuarterHorse
Member # 11882
|
posted
Then keep it simple and inexpensive. Go to Hubbards Machine in Hayward, talk to Jimie.
|
2T0NE
Member # 4216
|
posted
quote: Originally posted by QuarterHorse: Then keep it simple and inexpensive. Go to Hubbards Machine in Hayward, talk to Jimie.
+10
|