T O P I C R E V I E W
|
t top freak
Member # 6269
|
posted
well im looking at a 1995 cobra this weekend or early next week. its got all the bolt ons, some suspension work and 3.73's. if i buy this car ill probably end up rebuilding the motor but keeping the gt40/cobra set up with some minor porting. my question is which off the shelf cam i should go with. with such a mild street set up i cant justify getting a custom cam. holy hell its going to be nice to be in a mustang again
|
CobramanPhil
Member # 2170
|
posted
Well if you are going to get the heads ported and then keep the combination basically the same then you can still get a custom cam. Be forewarned though as any cam swap will at least require some fiddling with the idle (get a tune or tune yourself with a piggyback controller) due to the 94-95 computers. I mean you can do without, but it will do a lot better with some tuning.
|
JohnB
Member # 969
|
posted
Are you going to keep the 1.7 rockers? If so, run the Comp 2031 cam. it works with the 1.7's, doesn't throw a fit with the 94-95 computers, and works great. It's smog legal too.
|
asskickn88
Member # 4957
|
posted
Screw that, go with a TFS stage 3!!! Go big or go home If your going to run the 1.7's I hear the B303 works very well with those too.
|
t top freak
Member # 6269
|
posted
haha those were the two i was looking at...and the camzilla.
as for the rockers, i was planning on just using the 1.7s
|
Hungry Hippo
Member # 537
|
posted
2031 is a really good cam for 94/95's
|