|
Author
|
Topic: Sn95 disk brake in foxbody swap rim offset ?
|
SIKSEVN
¯
Member # 3033
|
posted
 
 
So I'm installing a stock sn95 disk brake front and rear end in my foxbody and want to know what offset should I buy my rims.. I want them to be flush with my car and not stick out.. From what I read on a short search the 24mm front offset with a 18x9 works but there to many post about the rear and need some help with that.. Do I go with the 18x10 w/ 45 mm offset
Or 18x10 w/ 30mm offset... Or should I just do 18x9 all around?
[ 2014-04-29, 10:21 PM: Message edited by: BLK92NOTCH ]
--------------------
92COUPE/HCI302/ S-TRIM/TREMEC/ 410-GEARS/6-POINT CAGE
Posts: 786 | From: BAY AREA | Registered: Jul 2003
| :
|
|
Blow_U_In_Reverse
¯
Member # 12298
|
posted
Just stick with 9" all the way around..
--------------------
"Real Men Get BLOWN"
-1993 Cobra "COBRUUH"
-1984 T-Top Notchback
#KurganTuned
Posts: 2688 | From: FiJi-925-650 | Registered: Aug 2012
| :
|
|
SIKSEVN
¯
Member # 3033
|
posted
So for the rear will a 18x9 30mm work I believe I read the 24mm will stick out
--------------------
92COUPE/HCI302/ S-TRIM/TREMEC/ 410-GEARS/6-POINT CAGE
Posts: 786 | From: BAY AREA | Registered: Jul 2003
| :
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
If you use a 94-98 8.8 rearend then the biggest you can go is 18x10 with 42mm offset. You will have to roll your wheel wells or grind them off and reeled the seem. 18x9 with 30mm offset would be the same but more clearance on the inside. Should be able to keep the quad shocks or reverse them.
--------------------
Project 93GT500 has started
90 Coyote Coupe (sold)
88 Mach 1 Coupe MM&FF 6/14 (sold)
65 FFR Cobra (sold)
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|
SIKSEVN
¯
Member # 3033
|
posted
Thanks for the help I just ordered the 18x9's with 30mm offset
--------------------
92COUPE/HCI302/ S-TRIM/TREMEC/ 410-GEARS/6-POINT CAGE
Posts: 786 | From: BAY AREA | Registered: Jul 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
