T O P I C R E V I E W
|
BLK92NOTCH
Member # 3033
|
posted
So I'm installing a stock sn95 disk brake front and rear end in my foxbody and want to know what offset should I buy my rims.. I want them to be flush with my car and not stick out.. From what I read on a short search the 24mm front offset with a 18x9 works but there to many post about the rear and need some help with that.. Do I go with the 18x10 w/ 45 mm offset Or 18x10 w/ 30mm offset... Or should I just do 18x9 all around? [ 2014-04-29, 10:21 PM: Message edited by: BLK92NOTCH ]
|
Blow_U_In_Reverse
Member # 12298
|
posted
Just stick with 9" all the way around..
|
BLK92NOTCH
Member # 3033
|
posted
So for the rear will a 18x9 30mm work I believe I read the 24mm will stick out
|
RRRCobraSC281
Member # 7086
|
posted
If you use a 94-98 8.8 rearend then the biggest you can go is 18x10 with 42mm offset. You will have to roll your wheel wells or grind them off and reeled the seem. 18x9 with 30mm offset would be the same but more clearance on the inside. Should be able to keep the quad shocks or reverse them.
|
BLK92NOTCH
Member # 3033
|
posted
Thanks for the help I just ordered the 18x9's with 30mm offset
|