Author
|
Topic: want to know
|
SLPR93
¯
Member # 8769
|
posted
-------------------------------------------------------------------------------- what would my car run at the track and hp? cobra intake 75 tb cold air intake 19lbs with 75mm maf eld. brock heads performers with 1.7 rr e 303 cam brand new 302 bassani headers,x pipe full msd aod with shift kit and 2800 stall electric fan pullies 410z 50 shot zex wet kit 16'' m/t drag radials any help will do or did f@#$ my self with this set up any ideas thanks
Posts: 1269 | From: modesto | Registered: Nov 2008
| :
|
|
Stangs R Us
¯
Member # 4495
|
posted
i would say 13.0s if u can hook maybe high 12s if ur lucky but u might wanna ditch the 19lb inj for some 24s , add some subframe connectors and some upper and lower control arms
Posts: 3100 | From: sacramento | Registered: Aug 2005
| :
|
|
SLPR93
¯
Member # 8769
|
posted
i do have a 24lb set up but i put the 19 when gas was 4.50 and im doing suspention in the early spring may b a 5 spd too or put the lentech valve body back in what spark plug gap with nitrous
Posts: 1269 | From: modesto | Registered: Nov 2008
| :
|
|
94 N.C.F GT
TEAM PLATINUM
Member # 8722
|
posted
and get ur upper and lower torq boxes reinforsed before you tare them off with those slicks
-------------------- TEAM PLATINUM 87LX:(D D) ORANGE coupe 94GT:(427) Its a BEAST on the streets but in the garage it stays ASLEEP. N/A
Posts: 1313 | From: RICHMOND/sanpablo | Registered: Oct 2008
| :
|
|
SLPR93
¯
Member # 8769
|
posted
whats a torq box and where is it?
Posts: 1269 | From: modesto | Registered: Nov 2008
| :
|
|
welch93lx
¯
Member # 8748
|
posted
quote: Originally posted by 427 StRoKeR SN94: and get ur upper and lower torq boxes reinforsed before you tare them off with those slicks
+1
-------------------- 1991 LX HAtchback R.I.P LUIS
Posts: 705 | From: modesto | Registered: Nov 2008
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
quote: Originally posted by welch93lx: quote: Originally posted by 427 StRoKeR SN94: and get ur upper and lower torq boxes reinforsed before you tare them off with those slicks
+1
first of all he is running dr's not full slicks. 2nd with the power he is make he isn't just going to rip his boxes up with out a little off roading help. put the 24's back on the car. get you a good set of upper & lower rear control arms. and there should be no problems going 12.8's-13.2's [ December 26, 2008, 11:51 AM: Message edited by: warhorse58gt ]
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
SLPR93
¯
Member # 8769
|
posted
but what are the torq box i just want to know cuz im only doing this set up cuz the economy im building a 331 [ December 26, 2008, 11:57 AM: Message edited by: SLPR93 ]
Posts: 1269 | From: modesto | Registered: Nov 2008
| :
|
|
*Als50*
¯
Member # 6003
|
posted
If you dnt have subframe connects. installed yet, pick up a set of long sub.,connectrs. with the torq box reinforcements.
-------------------- '00XlRangerSlammed-'91Gt347Turbo-'93CalypsoSCFaleen FOXLIVESMATTER ---------------- *BlackGunsMatter*
Posts: 1897 | From: La Bahia... | Registered: Sep 2005
| :
|
|
94 N.C.F GT
TEAM PLATINUM
Member # 8722
|
posted
torq boxes are in the back with ur rearend attached to the car its self there what u put ur upper and lower control arms on +1 get subframes. and u can mess those boxes up runn ur setup u can mess those up with a stock setup seen it done before and u dont want that to happen. they mite not rip off but they will get tweeked out specially if u swing donuts lol. [ December 26, 2008, 08:54 PM: Message edited by: 427 StRoKeR SN94 ]
-------------------- TEAM PLATINUM 87LX:(D D) ORANGE coupe 94GT:(427) Its a BEAST on the streets but in the garage it stays ASLEEP. N/A
Posts: 1313 | From: RICHMOND/sanpablo | Registered: Oct 2008
| :
|
|
SLPR93
¯
Member # 8769
|
posted
THANKS FELLAS
Posts: 1269 | From: modesto | Registered: Nov 2008
| :
|
|
Ty
¯
Member # 4920
|
posted
quote: Originally posted by SLPR93: -------------------------------------------------------------------------------- what would my car run at the track and hp? cobra intake 75 tb cold air intake 19lbs with 75mm maf eld. brock heads performers with 1.7 rr e 303 cam brand new 302 bassani headers,x pipe full msd aod with shift kit and 2800 stall electric fan pullies 410z 50 shot zex wet kit 16'' m/t drag radials any help will do or did f@#$ my self with this set up any ideas thanks
just a heads up but im runnin 13.90s all night long without the heads,cam, nitrous, 410s, electric fan and drag radials..
id say you should be around 12.1- 12.4 but thats just a guess
-------------------- DRIVE FAST TAKE CHANCES ---------------------------- 90 gt nothin special, just your average bolt ons...OUT TO PASTURE 69 fastback project car
Posts: 1400 | From: vallejo | Registered: Oct 2004
| :
|
|
Slow05GT
¯
Member # 8408
|
posted
Wow I know guys that have simular set ups an the run mid to high 13's but I cant remember what kind of tires they where on. [ December 28, 2008, 05:16 PM: Message edited by: 9svtcobra8 ]
Posts: 2233 | From: Natomas, ca | Registered: May 2008
| :
|
|
Cstang5.0
¯
Member # 4925
|
posted
im going to say low 13's to high 12's
-------------------- 88 VERT slow sold 89 coupe stock ; ) 02 yukon 05 focus
Posts: 1638 | Registered: Oct 2004
| :
|
|
SLPR93
¯
Member # 8769
|
posted
i will happy with my car running low 13s pretty good for a street car that looks stock and aod
Posts: 1269 | From: modesto | Registered: Nov 2008
| :
|
|