T O P I C R E V I E W
|
SLPR93
Member # 8769
|
posted
-------------------------------------------------------------------------------- what would my car run at the track and hp? cobra intake 75 tb cold air intake 19lbs with 75mm maf eld. brock heads performers with 1.7 rr e 303 cam brand new 302 bassani headers,x pipe full msd aod with shift kit and 2800 stall electric fan pullies 410z 50 shot zex wet kit 16'' m/t drag radials any help will do or did f@#$ my self with this set up any ideas thanks
|
Stangs R Us
Member # 4495
|
posted
i would say 13.0s if u can hook maybe high 12s if ur lucky but u might wanna ditch the 19lb inj for some 24s , add some subframe connectors and some upper and lower control arms
|
SLPR93
Member # 8769
|
posted
i do have a 24lb set up but i put the 19 when gas was 4.50 and im doing suspention in the early spring may b a 5 spd too or put the lentech valve body back in what spark plug gap with nitrous
|
427 StRoKeR SN94
Member # 8722
|
posted
and get ur upper and lower torq boxes reinforsed before you tare them off with those slicks
|
SLPR93
Member # 8769
|
posted
whats a torq box and where is it?
|
welch93lx
Member # 8748
|
posted
quote: Originally posted by 427 StRoKeR SN94: and get ur upper and lower torq boxes reinforsed before you tare them off with those slicks
+1
|
warhorse58gt
Member # 7702
|
posted
quote: Originally posted by welch93lx: quote: Originally posted by 427 StRoKeR SN94: and get ur upper and lower torq boxes reinforsed before you tare them off with those slicks
+1
first of all he is running dr's not full slicks. 2nd with the power he is make he isn't just going to rip his boxes up with out a little off roading help. put the 24's back on the car. get you a good set of upper & lower rear control arms. and there should be no problems going 12.8's-13.2's [ December 26, 2008, 11:51 AM: Message edited by: warhorse58gt ]
|
SLPR93
Member # 8769
|
posted
but what are the torq box i just want to know cuz im only doing this set up cuz the economy im building a 331 [ December 26, 2008, 11:57 AM: Message edited by: SLPR93 ]
|
*Als50*
Member # 6003
|
posted
If you dnt have subframe connects. installed yet, pick up a set of long sub.,connectrs. with the torq box reinforcements.
|
427 StRoKeR SN94
Member # 8722
|
posted
torq boxes are in the back with ur rearend attached to the car its self there what u put ur upper and lower control arms on +1 get subframes. and u can mess those boxes up runn ur setup u can mess those up with a stock setup seen it done before and u dont want that to happen. they mite not rip off but they will get tweeked out specially if u swing donuts lol. [ December 26, 2008, 08:54 PM: Message edited by: 427 StRoKeR SN94 ]
|
SLPR93
Member # 8769
|
posted
THANKS FELLAS
|
Ty
Member # 4920
|
posted
quote: Originally posted by SLPR93: -------------------------------------------------------------------------------- what would my car run at the track and hp? cobra intake 75 tb cold air intake 19lbs with 75mm maf eld. brock heads performers with 1.7 rr e 303 cam brand new 302 bassani headers,x pipe full msd aod with shift kit and 2800 stall electric fan pullies 410z 50 shot zex wet kit 16'' m/t drag radials any help will do or did f@#$ my self with this set up any ideas thanks
just a heads up but im runnin 13.90s all night long without the heads,cam, nitrous, 410s, electric fan and drag radials..
id say you should be around 12.1- 12.4 but thats just a guess
|
9svtcobra8
Member # 8408
|
posted
Wow I know guys that have simular set ups an the run mid to high 13's but I cant remember what kind of tires they where on. [ December 28, 2008, 05:16 PM: Message edited by: 9svtcobra8 ]
|
Cstang50
Member # 4925
|
posted
im going to say low 13's to high 12's
|
SLPR93
Member # 8769
|
posted
i will happy with my car running low 13s pretty good for a street car that looks stock and aod
|