Author
|
Topic: Need help with plumbing
|
dpracingdan
¯
Member # 5778
|
posted
Have a paxton supercharger boosting only about 5psi, but dont know how to route all the plumbing, breather line etc. Im concerned since The PCV keeps blowing out of the intake. Can someone advise me how to route it, and what to block off? Dont want to loose all my oil out the pcv hole. Help
Posts: 314 | Registered: Jun 2005
| :
|
|
92stangLX
¯
Member # 3252
|
posted
What model blower do you have? You can dowload installation instructions from Paxton's web site here:
http://www.paxtonauto.com/downloads.html
Did you install the tube that goes from the oil filler to the air intake?
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
dpracingdan
¯
Member # 5778
|
posted
Not sure which model, from what I've been told by other 5-0 guys, its an older model, since its got an oil fill tube and dipstick. It boosts about 5psi. I blocked off the tube from the intake to the oil breather, tried running the pcv line and all the other "breather" types all over, but still keeps popping the pcv or pcv grommet out of the intake. Not good. Just need another a pic or another car with same setup to copy.
Posts: 314 | Registered: Jun 2005
| :
|
|
|