This is topic Need help with plumbing in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011823
Posted by dpracingdan (Member # 5778) on
:
Have a paxton supercharger boosting only about 5psi, but dont know how to route all the plumbing, breather line etc. Im concerned since The PCV keeps blowing out of the intake. Can someone advise me how to route it, and what to block off? Dont want to loose all my oil out the pcv hole. Help
Posted by 92stangLX (Member # 3252) on
:
What model blower do you have? You can dowload installation instructions from Paxton's web site here:
http://www.paxtonauto.com/downloads.html
Did you install the tube that goes from the oil filler to the air intake?
Posted by dpracingdan (Member # 5778) on
:
Not sure which model, from what I've been told by other 5-0 guys, its an older model, since its got an oil fill tube and dipstick. It boosts about 5psi. I blocked off the tube from the intake to the oil breather, tried running the pcv line and all the other "breather" types all over, but still keeps popping the pcv or pcv grommet out of the intake. Not good. Just need another a pic or another car with same setup to copy.
Fueled by Ford Mustang Owners
on CaliforniaFords.com