Author
|
Topic: Infineon 1/07
|
need-a-cage
¯
Member # 5415
|
posted
Who is going out?
Don, good luck with your quest for the 12's! I am going to guess 13.001 @ 106.5mph. Just kidding, if you ran a 13.3 on Wednesday, you should be able to get a 12.95 @ 106.5 mph with sticky tires if you can get your 60 ft under 1.9. If you get too excited, put too much faith in the drag radials, and launch too hard and spin then you will get 13.001 with a 1.95 60ft. I am sure that your speed will be up with the cold weather and the fact that the weekend events are always faster for some reason.
Jersey, are you going? I am sure that you can hit the 12's on a weekend event. You need to go out and compete with Don.
I won't be there so let me know how you guys do.
Good luck.
Craig
-------------------- 93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT 10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
Took the car out with the tires yesterday. A, with the inch smaller wheel and shorter side wall on the tire it looks like SHIT in the rear, imo. B, don't think it'll hook hard enough for my 12 second pass with only a cold air as power adder.
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
It will be very hard to do. You are still going to have to ride the clutch a little with those tires. You can't shock them off the line by dropping the clutch at 4000 like you can with the ET Streets. They prep the track really well on the weekend events and for some reason my MPH is always higher as well. It just depends on how good your conditions were when you ran the 13.33. What was your 60ft on that run? You will need to be in the 1.8's to hit the 12's. If you speed stays at 105mph, you will probably need a 1.80 which will be tough.
Good Luck, Craig
-------------------- 93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT 10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
Tinner
¯
Member # 2688
|
posted
I'll be there on street tires and a 75 shot. [ January 06, 2007, 05:13 PM: Message edited by: Tinner ]
-------------------- 04 Comp. Orange mach 1 AED built 2.3 Whipple@17#s 605rwhp 580rwtq 10.71@131mph now with a little more power it goes 135mph+ on 18" DRs
Posts: 835 | From: santa rosa | Registered: Apr 2003
| :
|
|
Luke87GT
Lay'n more stripes than Caltrans
Member # 21
|
posted
Yo Tinner, long time man!
Life is short, 26x10.5 Mickeys and the 150 is calling
-------------------- Stangless
Posts: 7802 | From: San Mateo | Registered: Jul 2000
| :
|
|
stangless
¯
Member # 1414
|
posted
i'll be there looking for a 12.99 sec pass. Don, do you wanna line up for our first run or do you wanna get a practice one out of the way? Later
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
We can line up every practice run tomorrow!
Are you guys bringing a barbeque? Need me to bring anything?
Jersey, pm me your cell number. Your old number now belongs to a woman whos voice mail is full of church bs, LMFAO. I'm guessing it's not your number any more. I'll be leaving here around 7:30 tomorrow morning. YOu guys going to be in the same place as last time?
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote: Originally posted by hidnn.o.s.: We can line up every practice run tomorrow!
Are you guys bringing a barbeque? Need me to bring anything?
Jersey, pm me your cell number. Your old number now belongs to a woman whos voice mail is full of church bs, LMFAO. I'm guessing it's not your number any more. I'll be leaving here around 7:30 tomorrow morning. YOu guys going to be in the same place as last time?
650-922.....
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
A customer from RPM will be there as well in his 03 Cobra vert making 468RWHP "AND" his new Shelby
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
EVERYONE on the Corral and Ca-Mustangs says it canNOT be done
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote: Originally posted by hidnn.o.s.: EVERYONE on the Corral and Ca-Mustangs says it canNOT be done
that what cannot be done? almost stock 05 gt in the 12s? i don't agree. i think it could be done. I asked people about the 96 cobra and most people said it would go high 13s stock at best. i managed to get it into the mid 13s.. and have heard of a stock one going 13.0. SO just prove them wrong tomorrow. Good luck tomorrow Don. Call my cell when you get to the track.
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
Tinner
¯
Member # 2688
|
posted
quote: Yo Tinner, long time man!
Life is short, 26x10.5 Mickeys and the 150 is calling
Hey Luke , hows it goin'? 150+slicks=me asking you to hold the dust pan while I sweep up my rear end.... lol
-------------------- 04 Comp. Orange mach 1 AED built 2.3 Whipple@17#s 605rwhp 580rwtq 10.71@131mph now with a little more power it goes 135mph+ on 18" DRs
Posts: 835 | From: santa rosa | Registered: Apr 2003
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
12 Second car
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote: Originally posted by hidnn.o.s.: 12 Second car
Maybe... hopefully both This is a 12 sec car with someone other than me driving it.
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
happygmore
¯
Member # 7159
|
posted
wow jmir your car looks good!
Posts: 421 | From: west san jose | Registered: Oct 2006
| :
|
|
Tinner
¯
Member # 2688
|
posted
quote: 12 Second car
Yes
-------------------- 04 Comp. Orange mach 1 AED built 2.3 Whipple@17#s 605rwhp 580rwtq 10.71@131mph now with a little more power it goes 135mph+ on 18" DRs
Posts: 835 | From: santa rosa | Registered: Apr 2003
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
Good to see you out there Josh. I watched your last run and think you could have hit the bottle MUCH sooner! Look forward to seeing you out there more often!
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
Tinner
¯
Member # 2688
|
posted
quote: Good to see you out there Josh. I watched your last run and think you could have hit the bottle MUCH sooner! Look forward to seeing you out there more often!
Yea I could have ,I went 112.5mph with only +50hp . Plus 150 is going to be fun. p.s Nice run that car moves.
-------------------- 04 Comp. Orange mach 1 AED built 2.3 Whipple@17#s 605rwhp 580rwtq 10.71@131mph now with a little more power it goes 135mph+ on 18" DRs
Posts: 835 | From: santa rosa | Registered: Apr 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
112MPH damn.. nice. Congrats. Don where are your numbers!!!
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
The race that "would" have been AWESOME:
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote: Originally posted by hidnn.o.s.: The race that "would" have been AWESOME:
"It" was awesome. .. does my car look good from the back?
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
Jersey, like my 12.9 slip
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote: Originally posted by hidnn.o.s.: Jersey, like my 12.9 slip
Yes.. i loved it. did you like my launch?
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
need-a-cage
¯
Member # 5415
|
posted
Don,
So how close was my guess. What was your ET, speed, and 60ft.
Craig
-------------------- 93 LX Hatch, Dart Big Bore 347, Edelbrock 6037's, Cobra intake, Tremec, S-trim, 60# injectors, Tweecer RT 10.84 @ 128.5mph
Posts: 606 | From: Santa Rosa | Registered: Mar 2005
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
Slip reads:
Dial: 12.98 R/T: -.038 60': 1.933 330': 5.448 660': 8.340 MPH: 84.95 1000': 10.836
1/4: 12.967 MPH: 105.55 [ January 08, 2007, 12:40 AM: Message edited by: hidnn.o.s. ]
-------------------- R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|