Author
|
Topic: Cam suggestions
|
Billy Bob
¯
Member # 9412
|
posted
Hello I need help finding out what cam I should run 1991 5.0 notch with my set up. It's a 306 with AFR 185 heads,(still trying to figure out what rocker size) 30 lb injectors, Long tube headers, CAI, typhoon upper and lower intake for now. It will be for street and highway use
-------------------- JACK SWAG
Posts: 293 | From: Your chicks house | Registered: Aug 2009
| :
|
|
SLOWSN95
¯
Member # 8269
|
posted
Comp Xe282hr. Great midrange and cam that will pull upwards to 6500. Run that with a 1.6 and ALWAYS check ptv and pushrod length.
-------------------- 94' GT 347 Stroker MM Suspended
2003 SB SVT Lightning Pullied and Lowered
89'Hatch-SOLD
Posts: 2214 | From: 510/east bay | Registered: Mar 2008
| :
|
|
ed650
¯
Member # 9897
|
posted
Comp cam xe270hr if you supercharge it down the road or anderson n41 if you plan to stay all motor.
-------------------- 410w Hatch 306Ci Coupe
Posts: 1744 | From: menlo park | Registered: Apr 2010
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
b31hr for supercharge or nitrous and n-71 for na both from anderson motorsports
-------------------- REDLINE MOTORSPORTS CC EST 2011 1993 CHP sold 2004 mach 1 408 Windsor n20 fed R.I.P. JORGE GUTIERREZ JR 6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
Billy Bob
¯
Member # 9412
|
posted
quote: Originally posted by SLOWSN95: Comp Xe282hr. Great midrange and cam that will pull upwards to 6500. Run that with a 1.6 and ALWAYS check ptv and pushrod length.
What is ptv?
-------------------- JACK SWAG
Posts: 293 | From: Your chicks house | Registered: Aug 2009
| :
|
|
1Sick91
¯
Member # 6776
|
posted
ptv = piston to valve clearance.
Posts: 217 | From: Vacaville, Ca | Registered: May 2006
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote: Originally posted by Billy Bob: quote: Originally posted by SLOWSN95: Comp Xe282hr. Great midrange and cam that will pull upwards to 6500. Run that with a 1.6 and ALWAYS check ptv and pushrod length.
What is ptv?
Piston To Valve. You have to check for clearance otherwise you can potentially hit a piston with your valve. I've seen it before(not on my cars) and its not a pretty scene it'll cost you $$$$.
-------------------- -Savage Habits- 1992 Summer Edition 1986 Hatch- catfish killer 1964 Impala hard top
Posts: 18529 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
Billy Bob
¯
Member # 9412
|
posted
quote: Originally posted by NEIGHT: quote: Originally posted by Billy Bob: quote: Originally posted by SLOWSN95: Comp Xe282hr. Great midrange and cam that will pull upwards to 6500. Run that with a 1.6 and ALWAYS check ptv and pushrod length.
What is ptv?
Piston To Valve. You have to check for clearance otherwise you can potentially hit a piston with your valve. I've seen it before(not on my cars) and its not a pretty scene it'll cost you $$$$.
How do I check for that clearance?
-------------------- JACK SWAG
Posts: 293 | From: Your chicks house | Registered: Aug 2009
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
gotta get some playdoe take the heads off place the play doe on the valve reliefs put your heads back on torque your heads make sure you have the gasket on put your roller rockers on that cylinder and rotate motor one whole rotation then take off cylinder heads and check the play doe with a micromtor and see how much clearnace you have should be more than .080 on the intake and .100 on the exhuast hope this helps
-------------------- REDLINE MOTORSPORTS CC EST 2011 1993 CHP sold 2004 mach 1 408 Windsor n20 fed R.I.P. JORGE GUTIERREZ JR 6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote: Originally posted by Billy Bob: quote: Originally posted by NEIGHT: quote: Originally posted by Billy Bob: quote: Originally posted by SLOWSN95: Comp Xe282hr. Great midrange and cam that will pull upwards to 6500. Run that with a 1.6 and ALWAYS check ptv and pushrod length.
What is ptv?
Piston To Valve. You have to check for clearance otherwise you can potentially hit a piston with your valve. I've seen it before(not on my cars) and its not a pretty scene it'll cost you $$$$.
How do I check for that clearance?
You'll need: Play-doh or clay whatever you feel like using(play-doh works best) Check valve spring Valve spring compressor to remove valve spring
Once you have those you install the heads with gasket and everything and you turn the motor over a few times then pull it off and check the impression to see how much clearance you have. It's kind of a long process but it's better to check it now than later having it hit and you have to replace your piston/valve and get your heads reworked.
-------------------- -Savage Habits- 1992 Summer Edition 1986 Hatch- catfish killer 1964 Impala hard top
Posts: 18529 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
|