read DMs/my profile login | join CAFords | search | faq |

» Northern California Ford Owners     » Automotive   » Tech Talk   » wiring question

Email this post to someone!

Author Topic: wiring question EVLSONC ¯ Member # 6172 posted                              the ballast on my hid fog lights went bad. my dumb ass kept flipping the fogs on which caused some wires to smoke in the bay. There is about 3 inches of exposed wire near the CCRM. The wire is still intact but the insulation is melted off.I have no experience with wiring and was wondering is it safe to wrap it back up as is and still run my fogs? Thanks -------------------- 03 Sonic Blue Cobra Posts: 158 | From: Campbell | Registered: Nov 2005  |  : NK2186 ¯ Member # 12319 posted                              use some crimp splicers and a new piece of wire. If the insulation burned off it means the fog lights were drawing too much amperage through that wire which caused it to get hot and melt the insulation. You could have had a wire break which caused a short in the wire. I would not recommend that you just tape up a bare wire... Ever. -------------------- 90 LX 5.0 - Stolen/stripped 89 LX 5.0 - Stolen and missing as of 7-24-13. LIC# 4HIP151 :( 99 Cobra 00 Exploder Posts: 400 | From: Haystack | Registered: Aug 2012  |  :

Printer friendly view of this Ford topic

Hop To: Select a Forum: Category: Automotive -------------------- Tech Talk Drag Racing Road Racing, Auto X & Drifting Events/Shows/Cruises General Talk Street Racing Category: Commerce -------------------- FOR(D) SALE: non-automotive classifieds Vendor's FOR SALE Section

Questions/Requests/Suggestions? email CAFords



Fueled by Ford Mustang Owners
on CaliforniaFords.com