|
Author
|
Topic: loose steering wheel
|
STANGBOY
¯
Member # 7868
|
posted
 
 
Took off the covers don't see wer to tighten it up from ...it wiggles...can anybody help me out???
--------------------
1986 mustang notchback
she's good from far but far from good
Posts: 2510 | From: SAN JOSE | Registered: Aug 2007
| :
|
|
STANGBOY
¯
Member # 7868
|
posted
It's my 87 gt
--------------------
1986 mustang notchback
she's good from far but far from good
Posts: 2510 | From: SAN JOSE | Registered: Aug 2007
| :
|
|
fordfiveoh
¯
Member # 13107
|
posted
Loose meaning there's a lot of play in your steering or loose meaning the column goes up and down and side to side?
Loose steering is probably your steering shaft that connects from your rack to your steering column.
Loose column is probably the bolted section under the dash by your hood release latch.
Posts: 180 | From: Vallejo, CA | Registered: Aug 2013
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
Old worn out steering shaft. Mine used to do the same until I swapped it out for a MM one.
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18529 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
fredfifty
Since
9/2010
Member # 10320
|
posted
Sounds like rag joint on steering shaft is worn
Posts: 4948 | Registered: Sep 2010
| :
|
|
STANGBOY
¯
Member # 7868
|
posted
No just the steering wheel has play to it
--------------------
1986 mustang notchback
she's good from far but far from good
Posts: 2510 | From: SAN JOSE | Registered: Aug 2007
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
If its the column and not the shaft, there is an upper and lower bearing. if the bearings are not broken you can add some grease and reinstall, they usually just get moved out of place and cause a lot of movement in the column
--------------------
91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
KevinK
Tech Mod
Member # 9234
|
posted
Could be just a loose tilt column lever. Easy to tighten the screw.
Posts: 197 | From: San Mateo, CA | Registered: Jun 2009
| :
|
|
SacGrown89GT
¯
Member # 7435
|
posted
Mine had alot of wiggle room up and down on my 89. So i took off all the plastic covers as well as the blinker switch and tightened both the steering wheel bolts. I believe they were 9/16s. But could also be what the others say. Ide start here though.
--------------------
"Your shit aint hot!"
"No but its faster than your shoes"
"...."
Posts: 699 | From: SacGROWNmento | Registered: Feb 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
