Author
|
Topic: What can i use to compress my stock front springs?
|
phat50
¯
Member # 1998
|
posted
What can i use to compress my stock front springs to install them?? [ August 14, 2010, 03:31 AM: Message edited by: phat50 ]
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
2 jacks,marijuana,and an ak47..make it work pal
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
Jaejae5.0
¯
Member # 7958
|
posted
lol but yea have two jacks..its a squeeze braaa
-------------------- 1987 notchback h/c/i 302 & 70mm turbo SOLD
2000 camaro ss cam only
Posts: 4890 | From: the combustion chamber | Registered: Oct 2007
| :
|
|
phat50
¯
Member # 1998
|
posted
Help!! Need to find a way to install my stock front springs.
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
gercolla1
¯
Member # 3068
|
posted
use a spring compressor it get from autozone or harbor freight and make sure you seat the spring correct or else your car ride height will be off
-------------------- Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
Pumpkin_Notch
TEAM PLATINUM
Member # 3946
|
posted
Ye benny you can rent the tool from auto zone or kragens and if you think those are hard to put in try putting moroso drag springs in [ August 14, 2010, 12:40 PM: Message edited by: 94 N.C.F. GT ]
-------------------- TEAM PLATINUM 87LX: T-TOP PUMPKIN NOTCH 94N.C.F.GT: 418w www.facebook.com/PLATINUM1320tv
Posts: 2790 | From: RICHMOND/sanpablo | Registered: Dec 2003
| :
|
|
phat50
¯
Member # 1998
|
posted
Will i be able to get the tool out once the spring is in?
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
Pumpkin_Notch
TEAM PLATINUM
Member # 3946
|
posted
quote: Originally posted by phat50: Will i be able to get the tool out once the spring is in?
Yes it should fall rite down the middle once you unwind it and put your springs in
-------------------- TEAM PLATINUM 87LX: T-TOP PUMPKIN NOTCH 94N.C.F.GT: 418w www.facebook.com/PLATINUM1320tv
Posts: 2790 | From: RICHMOND/sanpablo | Registered: Dec 2003
| :
|
|
phat50
¯
Member # 1998
|
posted
ok. I was told that the hole on the A-arm is to small for the tool to fit thru.
-------------------- New toy coming soon!
Posts: 2860 | From: Richmond / Valley jo/ Petaluma | Registered: Oct 2002
| :
|
|
|
racsirx
CAFords OG
Member # 1710
|
posted
I did many times, so I gave on the spring compress way, I just did my Moroso spring this way, I just unbolted the whole control arm from the K-member, placed the spring in the perches of the control arm,then placed the jack under the control arm and jacked it into place and lined the bolt holes and bolt it in, very dangerous way of doing it but I found it easier.
-------------------- 88 Saleen #564 88 GT 331 NOVI2000 88 Coupe TURBO 9.75@142 95 Cobra R #75-SOLD 06 F250 13 BMW AH3 17 GT350 #5556 GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|