|
Author
|
Topic: most psi on a s trim
|
87#184saleen
¯
Member # 6276
|
posted
 
 
i was wodering whats the most psi on a s trim and what kind of injectors should i use ![[patriot]](graemlins/patriot.gif)
--------------------
R.I.P DAD 3/5/36 - 6/2/07
2004 PORSCHE CAYENNE S on 22”
2013 PORSCHE Panamera on 21”
1987 SALEEN #184
Member of R H P
Posts: 1455 | Registered: Dec 2005
| :
|
|
AJBlackGT
¯
Member # 3936
|
posted
Depends on the motor. You gotta calculate the blower rpm. I think the max rpm on an s-trim is 50k. But they can be overspun a little. If you are planning on spinning the blower that hard, you probably are going to need 60lb injectors.
--------------------
90 Notch
Posts: 1896 | From: Sacramento | Registered: Dec 2003
| :
|
|
SmokinLX
¯
Member # 1684
|
posted
Stock 5.0 will show more restriction "or psi" than a HCI 5.0 with good flowing exhaust. A totally stock 5.0 with a pullied S trim would probably show around 18 PSI, but if You took the same pullied S trim and put it on a stroker motor with great HCI and free flowing exhaust You might be down around 10-12 psi. My 306 with HCI and free flowing exhaust has a S trim that's pullied to max recommended RPM and makes 13 pound's.
--------------------
Dont claim power if ya cant mile per hour. 10 second AOD
Posts: 4388 | From: East Bay | Registered: Aug 2002
| :
|
|
87#184saleen
¯
Member # 6276
|
posted
THANKS
--------------------
R.I.P DAD 3/5/36 - 6/2/07
2004 PORSCHE CAYENNE S on 22”
2013 PORSCHE Panamera on 21”
1987 SALEEN #184
Member of R H P
Posts: 1455 | Registered: Dec 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
