Author
|
Topic: quality of fiberglass from age classic design
|
OneBadHatch
¯
Member # 970
|
posted
i was wondering if anyone had any experiance with their fiberglass bumpers rumors how they fit anything will help out will save me a bunch of money thanks guys
-------------------- 1990 GT TFS Intake and Cam AFR 165's Plus all the goodies
Posts: 834 | From: Oceanside, CA | Registered: Mar 2002
| :
|
|
166 Merlo
FELONY MOTORSPORTS
Member # 1549
|
posted
don't do it
-------------------- '89 - Boss Coupe '70 - Drop Cutthang '68 - Cougnut '87 - 0166, Its real
Posts: 3953 | From: Thebay | Registered: Jul 2002
| :
|
|
88DroptopGT
¯
Member # 2535
|
posted
Go with Cervini's. Most other manufacturer's (unless OEM) can't beat their ease-of-fit. Their prices are somewhat higher, but it pays off with less prep time. Saving $50-100 is nothing when it takes 4+ hours to prep it for paint and fitting problems after.
Posts: 3978 | From: 707 | Registered: Mar 2003
| :
|
|
MR GO FAST
¯
Member # 2088
|
posted
quote: Originally posted by 87 Saleen: don't do it
what the kid said..dont do it
-------------------- 1986 Gt that is faster than FOSTANGS pinto
Posts: 3729 | From: ATWATER/SANJO/RWC | Registered: Nov 2002
| :
|
|
vpr_klr
¯
Member # 3353
|
posted
All hoods need prepping and sanding down of the 'glass, and the Cervini's is no exception, the best, by far, fitting hood on the market is a Ford hood(cobra r). Or go with a Harwood, a lot more money, but in the end, you will be much happier. Most aftermarket hoods have extra material to make up for difference's in people's vehicle measurements.
-------------------- Project crustang has begun 14 mustangs and counting...
Posts: 893 | From: Livermore | Registered: Oct 2003
| :
|
|
OneBadHatch
¯
Member # 970
|
posted
thanks guys i am getting that stalker bumper and age classic was the only place with the same one too bad cause i would have saved like 300 but i figured cervinis is the best
-------------------- 1990 GT TFS Intake and Cam AFR 165's Plus all the goodies
Posts: 834 | From: Oceanside, CA | Registered: Mar 2002
| :
|
|
vpr_klr
¯
Member # 3353
|
posted
well, bumpers, now that is a different story!!!! Cervini's uses urethane like OE, AGE uses fiberglass. The cervini's bumper might fit better because you can flex and stretch the urethane, you have to massage the 'glass to fit. Also, if you hit somthing, the urethane will flex, the 'glass will crack and break. Body kits, by urethane, for hoods though, they are all the same, I would by the cervini's bumper and a harwood hood, because appearance is everything if you are going to change those parts
-------------------- Project crustang has begun 14 mustangs and counting...
Posts: 893 | From: Livermore | Registered: Oct 2003
| :
|
|
drews50
CAFords OG
Member # 2670
|
posted
quote: Originally posted by Platinum Pony: thanks guys i am getting that stalker bumper and age classic was the only place with the same one too bad cause i would have saved like 300 but i figured cervinis is the best
just remember, with everything in life, especially car parts, you get what you pay for. what seems like a deal in the beginning, will cease to look so good after more $$ is spent making the cheap part perform/look like the more expensive piece. splurge once and don't regret it. my two pesos
-------------------- *shiftylx*
2013 Race Red 5.0 "Lucy" 1967 Lime Gold 289 coupe "Ethel"
Posts: 2457 | From: phoenix | Registered: Apr 2003
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
quote: Originally posted by vpr_klr: well, bumpers, now that is a different story!!!! Cervini's uses urethane like OE, AGE uses fiberglass. The cervini's bumper might fit better because you can flex and stretch the urethane, you have to massage the 'glass to fit. Also, if you hit somthing, the urethane will flex, the 'glass will crack and break. Body kits, by urethane, for hoods though, they are all the same, I would by the cervini's bumper and a harwood hood, because appearance is everything if you are going to change those parts
Good advise...
Fiberglass bumpers are heavier than urethane too...
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
season'd 88
¯
Member # 169
|
posted
Another option would be Maier racing They've been making this stuff for thirty some yrs. and there local.
Posts: 1383 | Registered: Feb 2001
| :
|
|
vpr_klr
¯
Member # 3353
|
posted
Yeah, Maier does have good shit, you do get what you pay for
-------------------- Project crustang has begun 14 mustangs and counting...
Posts: 893 | From: Livermore | Registered: Oct 2003
| :
|
|
NorCalRydaz
¯
Member # 3233
|
posted
I bought a lift off cobra R hood from Cobra Designs $200. Fit HELLA GOOD. I also had a cervinis stalker front bumper. They all fit perfect on my 88. Just buy it and save $$$$
Posts: 2963 | From: San Jo | Registered: Sep 2003
| :
|
|