|
Author
|
Topic: cutting driveshaft
|
STREETFIGHTER50
¯
Member # 2973
|
posted
 
 
anyone tell d propper way & of any local spots 2 get it done? if i do it i'd only take an inch.
--------------------
'89 Coupe-Kurgan Tuned 498/491RW, Vortech SI, 351W
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
Fostang
¯
Member # 3752
|
posted
Nic you can't just cut it and weld it together.
Just take the measurements take it to a shop and have them do it.
It needs to get balanced by them.
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
STREETFIGHTER50
¯
Member # 2973
|
posted
i heard that i can just cut the yoke part of it-no need 4 welding??? ![[Confused]](confused.gif)
--------------------
'89 Coupe-Kurgan Tuned 498/491RW, Vortech SI, 351W
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
Have you ever seen what happens when the driveshaft breaks at the tranny tailshaft end? 1 of 2 things. The shaft plants itself into the ground as you're driving 60mph, and it either shoots the entire rearend out the back of the car, or it'll plant and you'll go end over end. My neighbor (CHP in the Livermore area) has seen both, and they're not pretty. If you feel confident enough to do the work yourself and save $50, then go for it.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
STREETFIGHTER50
¯
Member # 2973
|
posted
where can i get it done d ryt way then 4 only $50? that sounds like a cool deal.
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
Call around. Most of the driveshaft shops I used to go to in the Tracy area usually only charge anywhere from $50-$75 to shorten and balance a driveshaft.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
gixxer408
¯
Member # 2454
|
posted
Call Driveline Services in San Jose. They can cut, weld and balance. Good luck! ![[patriot]](graemlins/patriot.gif)
Posts: 413 | From: SJ | Registered: Feb 2003
| :
|
|
STREETFIGHTER50
¯
Member # 2973
|
posted
thanx 4 replies yall. any other shops closer to the 415 or 650?
--------------------
'89 Coupe-Kurgan Tuned 498/491RW, Vortech SI, 351W
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Web's welding in Vacaville (off Main) does them, it's around $60.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
STREETFIGHTER50
¯
Member # 2973
|
posted
415 or 650 area?
--------------------
'89 Coupe-Kurgan Tuned 498/491RW, Vortech SI, 351W
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
chosen1
¯
Member # 1906
|
posted
Bayshore Truck in South City. Ask for Steve
--------------------
1967 Fastback. Should go 10's -but doesn't
1993 Cobra
2003 Suzuki SVS
1966 Coupe -For Sale
Posts: 2205 | Registered: Sep 2002
| :
|
|
STREETFIGHTER50
¯
Member # 2973
|
posted
thanx ![[Big Grin]](biggrin.gif)
--------------------
'89 Coupe-Kurgan Tuned 498/491RW, Vortech SI, 351W
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
4RS FED
¯
Member # 2067
|
posted
quote:
Originally posted by Chosen1:
Bayshore Truck in South City. Ask for Steve
650-871-9193
--------------------
i have a twin turbo mustang and you don't!
Posts: 3686 | From: 650 | Registered: Nov 2002
| :
|
|
STREETFIGHTER50
¯
Member # 2973
|
posted
thanx again
--------------------
'89 Coupe-Kurgan Tuned 498/491RW, Vortech SI, 351W
Posts: 3925 | From: SF Bay Coastin' to Rocklin | Registered: Jun 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
