MAF and fuel system? - Northern California Ford Owners

Northern California Ford racer's Message Board Forum

Sell & Buy Ford Parts in Northern California Classifieds

Mustang Pictures / Videos of Ford Cars in Northern California

read DMs/my profile login | join CAFords | search | faq |

»	Northern California Ford Owners » Automotive » Tech Talk » MAF and fuel system? (Page 1)

Email this post to someone!

Page: 1 2

Author

Topic: MAF and fuel system?

dominic
¯
Member # 612

posted

how big of a difference am i goin to feel when i install 36lbsinjectors...aermotive afpr...255lph fuel pump..underdrive pulleys...pro 77 MAF

--------------------
Pro Built 347 Stroker
Decked - Balanced - Blueprinted
Bored Over .30
Scat 9000 Series Pistons/Rods - Kieth Black - Hyperthuetic Pistons
Edelbrock Aluminum RPM Performer Heads - 2.02 - 1.60
Edelbrock Upper & Lower RPM Performer Intake.
Edelbrock 75mm Throttle Body
Crane Aluminum Rocker Arms - 1.70
X303 Cam .542 Lift
Compression Ratio 9 - 6 - 1
3 Core Aluminum Radiator
Aluminum Water Pump
Timing Set At 10 *
FMS 36lbs Injectors
Pro 77mm MAF
9in K&N Conical Filter
130 Amp Alternator
Phelonic Spacer
Edelbrock ShortyHeaders 1 5/8
Heddman Off-Road H-Pipe 2 1/2
Flowmaster 2 Chamber
4.10 FMS Gears
Monroe Sensatrack Shocks & Struts
New Brake Hoses - Lines - Pads - Tie Rods
Hughes AOD Transmission
Hughes Custom Toque Converter
Stall 3400RPM
Hughes Shift Kit

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

Probably none if you had 30s before.

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

PunkINa5.SLOW
¯
Member # 10

posted

I didnt read it thoroughly.

You will feel the pullies and mass air.

It depends on what mass air you had on there before tho.

The pullies for sure.

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

stock 19lbs stock maf

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

HAHAHAHHAHAHAHAHAHHAAHA

You wont know what to do with yourself.

Just wait you will love it.

Did your pig even run with the stock crap on there?
lol

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

ya lol..it ill run a lil better i think...how many more HP u thin i will get?

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

Stimson
_
Member # 51

posted

Besides fuel, that motor is BEGGING for some real heads! You realize you've put mild 302 heads on a built 347??? That motor is begging for some AFR 185's!

Posts: 2373 | Registered: Jun 2000 | :

dominic
¯
Member # 612

posted

damn u think so???i thought i would just port em

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

buy that guys Victor Jrs on here and sell the RPMs

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

wut kinda times u think this thing will run?

--------------------
Pro Built 347 Stroker
Decked - Balanced - Blueprinted
Bored Over .30
Scat 9000 Series Pistons/Rods - Kieth Black - Hyperthuetic Pistons
Edelbrock Aluminum RPM Performer Heads - 2.02 - 1.60
Edelbrock Upper & Lower RPM Performer Intake.
Edelbrock 75mm Throttle Body
Crane Aluminum Rocker Arms - 1.70
X303 Cam .542 Lift
Compression Ratio 9 - 6 - 1
3 Core Aluminum Radiator
Aluminum Water Pump
Timing Set At 10 *
FMS 36lbs Injectors
Pro 77mm MAF
9in K&N Conical Filter
130 Amp Alternator
Phelonic Spacer
Edelbrock ShortyHeaders 1 5/8
Heddman Off-Road H-Pipe 2 1/2
Flowmaster 2 Chamber
4.10 FMS Gears
Monroe Sensatrack Shocks & Struts
New Brake Hoses - Lines - Pads - Tie Rods
Hughes AOD Transmission
Hughes Custom Toque Converter
Stall 3400RPM
Hughes Shift Kit

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

Stimson
_
Member # 51

posted

quote:
Originally posted by dominic:
damn u think so???i thought i would just port em

The most I've heard of those heads flowing piss maxed "stage III+" is about 270ish CFM...and I bet the intake runners where more than 185cc after they where hogged out. AFR 185's will do better than that box stock and leave you room to grow. Its pretty much a no brainer. CAMARA90 on hear ran AFR 165's, Holley intake and a X cam and made 350 rwhp. I would guess your combo (AFTER you get injectors and MAF) will be making power in the low 300 range...thats what a stock bottem end 302 can make with a well matched off the shelf combo

Posts: 2373 | Registered: Jun 2000 | :

dominic
¯
Member # 612

posted

so with some bigger heads..victors ..i cant get near 350rwhp?what else would i need?

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

Just squeeze it

lol.

I know what you are thinking.

Where were we when you were putting your parts list together and went with the RPMs huH?

Oh well man.

Sell em and buy some AFRs

Or the Victor Jrs on here.

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

guess i should then...i order my 255lph and my afpr.....and im gona buy a NOS kit..run like a 75-100 shot

--------------------
Pro Built 347 Stroker
Decked - Balanced - Blueprinted
Bored Over .30
Scat 9000 Series Pistons/Rods - Kieth Black - Hyperthuetic Pistons
Edelbrock Aluminum RPM Performer Heads - 2.02 - 1.60
Edelbrock Upper & Lower RPM Performer Intake.
Edelbrock 75mm Throttle Body
Crane Aluminum Rocker Arms - 1.70
X303 Cam .542 Lift
Compression Ratio 9 - 6 - 1
3 Core Aluminum Radiator
Aluminum Water Pump
Timing Set At 10 *
FMS 36lbs Injectors
Pro 77mm MAF
9in K&N Conical Filter
130 Amp Alternator
Phelonic Spacer
Edelbrock ShortyHeaders 1 5/8
Heddman Off-Road H-Pipe 2 1/2
Flowmaster 2 Chamber
4.10 FMS Gears
Monroe Sensatrack Shocks & Struts
New Brake Hoses - Lines - Pads - Tie Rods
Hughes AOD Transmission
Hughes Custom Toque Converter
Stall 3400RPM
Hughes Shift Kit

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

dominic
¯
Member # 612

posted

so if i get those victors...and squeeze 100 shot...what kind of times am i lookin at?

--------------------
Pro Built 347 Stroker
Decked - Balanced - Blueprinted
Bored Over .30
Scat 9000 Series Pistons/Rods - Kieth Black - Hyperthuetic Pistons
Edelbrock Aluminum RPM Performer Heads - 2.02 - 1.60
Edelbrock Upper & Lower RPM Performer Intake.
Edelbrock 75mm Throttle Body
Crane Aluminum Rocker Arms - 1.70
X303 Cam .542 Lift
Compression Ratio 9 - 6 - 1
3 Core Aluminum Radiator
Aluminum Water Pump
Timing Set At 10 *
FMS 36lbs Injectors
Pro 77mm MAF
9in K&N Conical Filter
130 Amp Alternator
Phelonic Spacer
Edelbrock ShortyHeaders 1 5/8
Heddman Off-Road H-Pipe 2 1/2
Flowmaster 2 Chamber
4.10 FMS Gears
Monroe Sensatrack Shocks & Struts
New Brake Hoses - Lines - Pads - Tie Rods
Hughes AOD Transmission
Hughes Custom Toque Converter
Stall 3400RPM
Hughes Shift Kit

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

Dude those heads on a 347 have the potential to go 10s

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

so i put on those heads and squeze 100 and im lookin t low 11's?high 10's?with traction

--------------------
Pro Built 347 Stroker
Decked - Balanced - Blueprinted
Bored Over .30
Scat 9000 Series Pistons/Rods - Kieth Black - Hyperthuetic Pistons
Edelbrock Aluminum RPM Performer Heads - 2.02 - 1.60
Edelbrock Upper & Lower RPM Performer Intake.
Edelbrock 75mm Throttle Body
Crane Aluminum Rocker Arms - 1.70
X303 Cam .542 Lift
Compression Ratio 9 - 6 - 1
3 Core Aluminum Radiator
Aluminum Water Pump
Timing Set At 10 *
FMS 36lbs Injectors
Pro 77mm MAF
9in K&N Conical Filter
130 Amp Alternator
Phelonic Spacer
Edelbrock ShortyHeaders 1 5/8
Heddman Off-Road H-Pipe 2 1/2
Flowmaster 2 Chamber
4.10 FMS Gears
Monroe Sensatrack Shocks & Struts
New Brake Hoses - Lines - Pads - Tie Rods
Hughes AOD Transmission
Hughes Custom Toque Converter
Stall 3400RPM
Hughes Shift Kit

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

yup

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

sunds good is he firm at 1250?how much do i sell my heads for?

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

Stimson
_
Member # 51

posted

Yeah, you *need* a fuel system AND some real heads, victors or AFR 185's. The victors have more room to grow, the AFR 185's have better velocity (wider power band/more power down low). Either way, those Performer RPM heads need to be in the FOR(D) SALE section soon

Posts: 2373 | Registered: Jun 2000 | :

dominic
¯
Member # 612

posted

ok i buy some heads..and i allready have my afpr and 255lph

--------------------
Pro Built 347 Stroker
Decked - Balanced - Blueprinted
Bored Over .30
Scat 9000 Series Pistons/Rods - Kieth Black - Hyperthuetic Pistons
Edelbrock Aluminum RPM Performer Heads - 2.02 - 1.60
Edelbrock Upper & Lower RPM Performer Intake.
Edelbrock 75mm Throttle Body
Crane Aluminum Rocker Arms - 1.70
X303 Cam .542 Lift
Compression Ratio 9 - 6 - 1
3 Core Aluminum Radiator
Aluminum Water Pump
Timing Set At 10 *
FMS 36lbs Injectors
Pro 77mm MAF
9in K&N Conical Filter
130 Amp Alternator
Phelonic Spacer
Edelbrock ShortyHeaders 1 5/8
Heddman Off-Road H-Pipe 2 1/2
Flowmaster 2 Chamber
4.10 FMS Gears
Monroe Sensatrack Shocks & Struts
New Brake Hoses - Lines - Pads - Tie Rods
Hughes AOD Transmission
Hughes Custom Toque Converter
Stall 3400RPM
Hughes Shift Kit

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

PunkINa5.SLOW
¯
Member # 10

posted

If the heads are brand new then you know 800.

If they are used then 700 on down.

Figure anyone looking for a performance head over 700 and NEW will probably go with TFS heads...so sell em just below TFS at about 800 maybe more locally

--------------------
OUTTA THA DRAMA

R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03

Posts: 2495 | From: MTZ | Registered: Sep 2000 | :

dominic
¯
Member # 612

posted

ok will do...so just a head swap and a 100 shot and im 10's?

Posts: 105 | From: bay area,eastbay | Registered: Dec 2001 | :

customN2O
¯
Member # 914

posted

quote:

so if i get those victors...and squeeze 100 shot...what kind of times am i lookin at?

quote:

Listen to Dan about the heads, he knows what hes doing. But if you are going to go nitrous, do not get NOS. NOS wont give you the gains that I can give you. I guarantee at least 1 sec gain with a 100 shot out of my NX kit (stock jetting of course), and 10 mph, if you can hook it up. The 100 hp shot will give you more then the NOS 200 shot! Dont beleive me? Stay tuned for some proven results. Dont want to wait, ask around how my car runs with the stuff....

--------------------
[img]http://www.zimmermanmotorsports.com/zimban2.gif[/img]

Posts: 222 | From: Bay Area | Registered: Feb 2002 | :

customN2O
¯
Member # 914

posted

Shoot me an email, and I can give you some more info.....

--------------------
[img]http://www.zimmermanmotorsports.com/zimban2.gif[/img]

Posts: 222 | From: Bay Area | Registered: Feb 2002 | :

Page: 1 2

Printer friendly view of this Ford topic

Questions/Requests/Suggestions? email CAFords

Fueled by Ford Mustang Owners
on CaliforniaFords.com