|
Author
|
Topic: 1993 Mustang GT Black 5.0L 5speed clean title
|
turbo50
¯
Member # 6700
|
posted
 
 
This car is going to be ready to go at the end of October. I am putting feelers out there right now.
It is a clean title 1993 Mustang GT 5.0l 5speed.
The paint is great except for a small bit of oxidation on the roof but if this starts to kill my sale I will have my buddy shoot and blend it.
The car will be smogged and registered, california tags with clean title.
It will have a re ring/bearing motor and a b303 cam in it with billet timing set, ARP hardened oil pump drive and melling steel oil pump. All new freeze plugs, gaskets etc.
It will have a Tremec T5z in it. Not a 3550 or TKO.
Car will be 100% ready to drive to New York.
Car is caged and subframes are tied in. Look pretty decent.
Has tons of neat little nick nack shit.
Pm me for the laundry list if you are seriously interested.
Here are some pics.
Will be priced at $3500/best offer.
Dan 925-348-1534
Fresh motor with Canton 7 quart pain in satin black.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
Here is the laundry list:
1991 5.0 motor forged trw factory pistons.
New rings/bearings
Polished crank (have all receipts, do the work my own)
Stock low mileage (75K) heads with valves lapped in.
B 303 camshaft
Billet keith craft adj true roller timing chain/gear set.
ARP hardened oil pump driveshaft
Steel melling pump
Canton 7 quart race pan
New freeze plugs and galley plugs.
All new gaskets/seals (receipts)
New vert motor mounts
$650
(installation available to whoever buys it)
Stock clutch with about 60% life on it.
Free with trans purchase
Tremec z spec trans
$250
Full 8 point cage
Full subframes
BBK inline boost a pump
$50
Flowmasters
$30
H pipe (have catted one too)
BBK shorty headers, non equal
$50
Under drive pulleys
New serpentine belt.
3 core FMS radiator
$60
FMS blue hoses
Black magic fan
$60
Brand new front struts
Brand new front pads
Brand new rear shoes
E brake works perfect.
Billet upr interior dress up kit
Gauge pod
$15
Radio gauge pod with custom switches custom made
$50
Nitrous arm switches in ash tray
$20
White face gauges
Truck mount battery
Optima battery (will keep if sold as a roller)
Tubular front k member (ground pounder or d&d not sure)
$160
Brand new front tires
Clean ponies with not one nick!
$160
Former renegade blower car fenderwell cut for Anderson power pipe
Tubular upper and lower control arms
$150
Lake wood 50/50 rear shocks
$25
White face SVO auto meter tach
$100
[ September 16, 2009, 03:58 PM: Message edited by: turbo50 ]
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
Also have brand new headlights in the box $75
Car has a cobra insert.
[ September 16, 2009, 03:54 PM: Message edited by: turbo50 ]
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Robb
¯
Member # 9444
|
posted
Oh damn. If its going to be registered and smogged i'm interested. Any shots of the roof?
Posts: 2467 | From: Sacramento,CA | Registered: Sep 2009
| :
|
|
turbo50
¯
Member # 6700
|
posted
quote:
Originally posted by BladeX10:
Oh damn. If its going to be registered and smogged i'm interested. Any shots of the roof?
Yes.
3rd pic down you can see the roof oxidation.
Dan
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
OR
I will sell this car as a roller still titled (clean) in South Carolina.
Roller with suspension: $1800
Roller without suspension (Ill put stock pieces in) $1500
Serious only.
Dan
925-348-1534
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
|
|
Robb
¯
Member # 9444
|
posted
Oh.. Doesnt look that bad. I'm just looking for a black 90-93 fox gt. LMK when youre getting close to completing it
Posts: 2467 | From: Sacramento,CA | Registered: Sep 2009
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
Don't forget about the bra ![[Wink]](wink.gif)
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
turbo50
¯
Member # 6700
|
posted
May end up parting out 1SLOWLX style if I sell it as a roller.
See goody list for prices.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
Pending sale.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
1sic50
¯
Member # 6684
|
posted
what kind of heads are on the this motor?
--------------------
90 gt W/Vortech S-Trim power adder
99 Explorer W/5.0
87 crx honda WNP!!!!
Ford 4 Life Enough Said Don't Hate
Posts: 534 | From: GOTHAM CITY | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
quote:
Originally posted by 1sic50:
what kind of heads are on the this motor?
AFR heads and I only want $650 for it!!!!LOL NOT.
It has STOCK heads that have 75K on them and I have lapped the valves in and put new seals in them.
Dan
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
Just to clarify what I call a ROLLER.
That means you need to put a motor/trans/exhaust/radiator and driveshaft in the car.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
This thing is probably sold as a roller on Saturday morning.
TTT pending until then.
Like to find buyers for the associated parts if it sells.
Dan
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
|
|
turbo50
¯
Member # 6700
|
posted
quote:
Originally posted by fasthatch:
dan i take the headers
You got em if it sells bro.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote:
Originally posted by turbo50:
quote:
Originally posted by fasthatch:
dan i take the headers
You got em if it sells bro.
cool who ever buys this is going to get a nice car
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
SOLD.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
