|
Author
|
Topic: UPR caster camber plate knocking on bumps
|
naked5.0notch
¯
Member # 14058
|
posted
 
 
Hearing a knocking noise around the strut top area on the driver side hitting bumps. This is after the initial alignment
Set up is eibach sportline springs, kyb agx shocks/struts and upr caster camber plates along with upr upper and lower rear control arms
Posts: 1223 | Registered: May 2015
| :
|
|
510.86.notch
¯
Member # 9892
|
posted
Check your front sway bar mount.the spot welds on my wife's car started separated and making a clicking noise.just a thought.
--------------------
91 mustang coupe
84 mustang svo
89 mustang.4cyl5speed.
87 thunderbird turbo coupe-sold
86 mustang GT hatch-sold-kinda
86 mustang coupe-sold
Posts: 1062 | From: san leandro | Registered: Apr 2010
| :
|
|
naked5.0notch
¯
Member # 14058
|
posted
Will check that out. Just looks like the top mount knocks and moves around with all the bolts tight
Posts: 1223 | Registered: May 2015
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote:
Originally posted by naked5.0notch:
Will check that out. Just looks like the top mount knocks and moves around with all the bolts tight
The strut moves up and down with the bolts tight? Add a strut spacer
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18548 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
naked5.0notch
¯
Member # 14058
|
posted
The center rod with it tight moves up and down a little so the ball bearing is moving up/down on the driver side. Pass side is tight
Posts: 1223 | Registered: May 2015
| :
|
|
|
|
*Als50*
¯
Member # 6003
|
posted
Send them back to UPR for replacements.
Posts: 1897 | From: La Bahia... | Registered: Sep 2005
| :
|
|
naked5.0notch
¯
Member # 14058
|
posted
Called upr they had some suggestions but I don't think they will take them back. They are roughly ten years old
Posts: 1223 | Registered: May 2015
| :
|
|
*Als50*
¯
Member # 6003
|
posted
Mine are a little older than yours and i told them either repair or replace them since it was not problem that they were failing. Sent them back. Got new ones. Don't take NO for an answer.
Posts: 1897 | From: La Bahia... | Registered: Sep 2005
| :
|
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
