|
Author
|
Topic: any 1 in the 209 know how to set up timing chains on a 4v???
|
90 7up lx
¯
Member # 10304
|
posted
 
 
About to start assembling my 4v engine, and would like a lill help on seting up my timing....if any 1one in the 209 is knowledgeable and willing to help me out it would be great...lmk
209-947-3249
thanks
Posts: 1266 | From: north valley | Registered: Sep 2010
| :
|
|
Just_a_GT
¯
Member # 10372
|
posted
Buy some beer and some hot wings and I'll help
Posts: 697 | From: Winton, CA | Registered: Oct 2010
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
It's easier to have a pic for reference...
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6525 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
90 7up lx
¯
Member # 10304
|
posted
Kool.....isnt their a special tool needed to hold the cams in place when setting up tge timing chains...
Posts: 1266 | From: north valley | Registered: Sep 2010
| :
|
|
SacStangDriver
¯
Member # 8304
|
posted
Just have a friend hold them with 18mm wrench
--------------------
Need sidework done at great prices? I work on all makes and models from engine work to gears. Check engine light problems too. 916 912 3493
Posts: 1217 | From: sacramento | Registered: Mar 2008
| :
|
|
SacStangDriver
¯
Member # 8304
|
posted
if you put the crank keyway at 9 oclock you are in safe mode. so if the cams turns 90 degrees you are ok. make sure you have the intake and exhaust cams dialed in first. then you can do the two long chains. pm me with any questions. i've done way to many mod motors.
[ 2014-05-14, 03:13 AM: Message edited by: SacStangDriver ]
--------------------
Need sidework done at great prices? I work on all makes and models from engine work to gears. Check engine light problems too. 916 912 3493
Posts: 1217 | From: sacramento | Registered: Mar 2008
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
