|
Author
|
Topic: E303 cam
|
H8RPWRD
¯
Member # 12588
|
posted
 
 
Can I stuff an e303 cam in my stock 302 with out modifications? If not what modifications do I need to perform. Also it's an automatic. Thanks CAFords ![[patriot]](graemlins/patriot.gif)
--------------------
89 Lx Vert
93 LX Notch- sold
01 Bullitt #00919- Sold
90 LX- Sold
89 LX Vert- Sold
89 LX (DarkHorse)-Sold
Posts: 1332 | From: Hayward | Registered: Dec 2012
| :
|
|
H8RPWRD
¯
Member # 12588
|
posted
Only mods are 3.73's
--------------------
89 Lx Vert
93 LX Notch- sold
01 Bullitt #00919- Sold
90 LX- Sold
89 LX Vert- Sold
89 LX (DarkHorse)-Sold
Posts: 1332 | From: Hayward | Registered: Dec 2012
| :
|
|
91-hatch650
¯
Member # 12045
|
posted
Yes you can i had my old hatchback like dat all stock with a e303 cam
--------------------
1991 mustang gt (new project)
1987 xchp coupe (new project)
1994 mustang cobra (sold)
1990 ssp coupe(sold)
1989 grey hatch(sold)
Posts: 116 | From: san jose | Registered: May 2012
| :
|
|
NK2186
¯
Member # 12319
|
posted
my 89 that got stolen was setup like this.
E303 cam installed dot to dot without no advance. stock hyper piston motor with e7 heads that had upgraded springs to support the cam. I also threw in new roller lifters from ford and hardened push rods and some roller rockers.
The e cam is nice and sounds good too.
--------------------
90 LX 5.0 - Stolen/stripped
89 LX 5.0 - Stolen and missing as of 7-24-13. LIC# 4HIP151 :(
99 Cobra
00 Exploder
Posts: 400 | From: Haystack | Registered: Aug 2012
| :
|
|
H8RPWRD
¯
Member # 12588
|
posted
quote:
Originally posted by NK2186:
my 89 that got stolen was setup like this.
E303 cam installed dot to dot without no advance. stock hyper piston motor with e7 heads that had upgraded springs to support the cam. I also threw in new roller lifters from ford and hardened push rods and some roller rockers.
The e cam is nice and sounds good too.
Yeah I was thinking of upgrading my springs and rockers along with new lifters and pushrods
--------------------
89 Lx Vert
93 LX Notch- sold
01 Bullitt #00919- Sold
90 LX- Sold
89 LX Vert- Sold
89 LX (DarkHorse)-Sold
Posts: 1332 | From: Hayward | Registered: Dec 2012
| :
|
|
SikWiditMke
¯
Member # 9699
|
posted
I have a e-cam. With stock ported heads. Alex spring parts valve springs. And stock rockers and comp push rods...
Runs great, good idle, everyday driver.
--------------------
90 GT *sold*
92 GT *sold*
90 Notchback *wrecked and sold*
93 Ex-CHP notchback *Daily driver*
Posts: 558 | From: El Sobrante/Vallejo | Registered: Jan 2010
| :
|
|
H8RPWRD
¯
Member # 12588
|
posted
Cool cool. Thanks CAFord DarkHorse will be galloping a little beefier real soon. ![[Big Grin]](biggrin.gif)
--------------------
89 Lx Vert
93 LX Notch- sold
01 Bullitt #00919- Sold
90 LX- Sold
89 LX Vert- Sold
89 LX (DarkHorse)-Sold
Posts: 1332 | From: Hayward | Registered: Dec 2012
| :
|
|
nasty93
¯
Member # 8935
|
posted
That cam won't perform all that great without bigger breathing heads and intake.
Posts: 464 | From: windsor ,ca | Registered: Feb 2009
| :
|
|
SLOWSN95
¯
Member # 8269
|
posted
No new heads = no power gain
Save up another $1k and get aluminum heads or else you'll be installing the cam basically just for a lope.
--------------------
94' GT
347 Stroker
MM Suspended
2003 SB SVT Lightning
Pullied and Lowered
89'Hatch-SOLD
Posts: 2214 | From: 510/east bay | Registered: Mar 2008
| :
|
|
NK2186
¯
Member # 12319
|
posted
quote:
Originally posted by FiveOhChuck:
quote:
Originally posted by NK2186:
my 89 that got stolen was setup like this.
E303 cam installed dot to dot without no advance. stock hyper piston motor with e7 heads that had upgraded springs to support the cam. I also threw in new roller lifters from ford and hardened push rods and some roller rockers.
Yeah I was thinking of upgrading my springs and rockers along with new lifters and pushrods
Check out http://www.alexsparts.com
The drop in spring kit was like $100 or less for the E7 heads. I put them in myself with a shitty valve spring c clamp type tool you can rent from autozone.
The springs he sells seem to be name brand just ordered in bulk and re-packed. Get some hardened push rods too while you are at it.
Here's a clip of my exhaust with the setup I mentioned above running 14 degrees timing
https://db.tt/AdDXvPFt
The e cam is nice and sounds good too.
[ 2013-09-27, 11:23 AM: Message edited by: NK2186 ]
--------------------
90 LX 5.0 - Stolen/stripped
89 LX 5.0 - Stolen and missing as of 7-24-13. LIC# 4HIP151 :(
99 Cobra
00 Exploder
Posts: 400 | From: Haystack | Registered: Aug 2012
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
