T O P I C R E V I E W
|
SLOWSN95
Member # 8269
|
posted
Looking for whoever is very knowledgeable with nitrous. Just hooked up a Zex dry kit on my car and the nitrous just isn't hitting.
Kit turns on, my WOT switch is set properly, vacuum line and fuel pressure regulator is setup correctly, the lines are completely clear of any obstructions, and the nozzle sprays with a solid stream. I can here the nitrous being injected while I'm WOT, but don't feel any difference. My traps were 2mph faster and my ET improved only by 2 tenths of a second with the same 60ft.
Forgot to add.. running 100 shot (46 n2o/40 vacuum) at 8* base timing and 900-1000 psi bottle pressure).
Has anybody experienced anything like this before?
|
Cstang5.0
Member # 4925
|
posted
Make sure the vac line are on the right way and not switched [ 2013-07-07, 01:22 PM: Message edited by: Cstang5.0 ]
|
BIGBALLFACTOR
Member # 7277
|
posted
Zex sucks balls frist of all.but were is your nozzle located at
|
SLOWSN95
Member # 8269
|
posted
Vacuum lines are on correctly, "intake" to the plenum, and "regulator" to the fuel pressure regulator.
Fogger nozzle is about 6 inches from the throttle body. And yes, its facing the correct way.
|
BIGBALLFACTOR
Member # 7277
|
posted
quote: Originally posted by SLOWSN95: Vacuum lines are on correctly, "intake" to the plenum, and "regulator" to the fuel pressure regulator.
Fogger nozzle is about 6 inches from the throttle body. And yes, its facing the correct way.
That to far away from the t body
|
SLOWSN95
Member # 8269
|
posted
quote: Originally posted by BIGBALLFACTOR: quote: Originally posted by SLOWSN95: Vacuum lines are on correctly, "intake" to the plenum, and "regulator" to the fuel pressure regulator.
Fogger nozzle is about 6 inches from the throttle body. And yes, its facing the correct way.
That to far away from the t body
You think so? Instructions say between 6-11".
|
Pure Stang
Member # 7251
|
posted
Maybe the wrong jetting? Would a pinched line somewhere cause it? I have experience with zex and never had a issue. You should defiantly feel the hit.
|
Pure Stang
Member # 7251
|
posted
quote: Originally posted by SLOWSN95: quote: Originally posted by BIGBALLFACTOR: quote: Originally posted by SLOWSN95: Vacuum lines are on correctly, "intake" to the plenum, and "regulator" to the fuel pressure regulator.
Fogger nozzle is about 6 inches from the throttle body. And yes, its facing the correct way.
That to far away from the t body
You think so? Instructions say between 6-11".
Mine is was about 6 inches away and it worked great.
|
sleeping stallion
Member # 8162
|
posted
What plugs are you running
|
turbo50
Member # 6700
|
posted
Bypass wot switch and try again
|
SLOWSN95
Member # 8269
|
posted
Autolite 24s gapped at .035"
Will do Dan.
Buddy of mine said its possible to get a bad batch of nitrous.. anybody hear of this before?
|
sleeping stallion
Member # 8162
|
posted
Id personally run tr6 ngk and reprogram the zex box where did u tap into ur fuel any pics would help
|
SLOWSN95
Member # 8269
|
posted
quote: Originally posted by sleeping stallion: Id personally run tr6 ngk and reprogram the zex box where did u tap into ur fuel any pics would help
It's a dry. No fuel jet. The plugs are one step clolder gapped properly.. and I'm running cast heads
|
BIGBALLFACTOR
Member # 7277
|
posted
quote: Originally posted by SLOWSN95: Autolite 24s gapped at .035"
Will do Dan.
Buddy of mine said its possible to get a bad batch of nitrous.. anybody hear of this before?
Yes nitrous can go bad personal I would get rid of the zex kit an go with a nx kit it has so much better parts an you will be happier with it.
|
5.0 LsX
Member # 10017
|
posted
are you adding fuel when you spray??
|
SLOWSN95
Member # 8269
|
posted
My chip has 3-4% fuel added across the board and the zex kit adds pressure to the regulator on top of that. I'm not even going to deal with it right now. I'm sure it's something simple.. maybe a bad batch of nitrous??
|
wilit
Member # 3367
|
posted
See if you can swap bottles with someone so they can make sure your bottle has good nitrous in it.
|
SLOWSN95
Member # 8269
|
posted
quote: Originally posted by wilit: See if you can swap bottles with someone so they can make sure your bottle has good nitrous in it.
I will try that as soon as I possibly can. Thanks.
|