T O P I C R E V I E W
|
Big block 66 f100
Member # 8867
|
posted
I just put a new motor in my 94 and it hangs up when you push in the clutch....if i start the car it idles fine but as soon as i start driving it and push in the clutch it idles at like 2,000 rpms i tried to reset the tps and it didn't help does anyone have any ideas????i appreciate any positive input
|
MACK.GT
Member # 10461
|
posted
When my 94 GT did that, I base idle reset , adjusted the throttle blade to the rpm I wanted at idle. Also replaced the idle air control valve.
|
n8 killer
Member # 7277
|
posted
hit the pcm with a hammer
|
Big block 66 f100
Member # 8867
|
posted
quote: Originally posted by n8 killer: hit the pcm with a hammer
Come on dave im not you i dont use a hammer to fix problems on cars...
|
n8 killer
Member # 7277
|
posted
quote: Originally posted by Big block 66 f100: quote: Originally posted by n8 killer: hit the pcm with a hammer
Come on dave im not you i dont use a hammer to fix problems on cars...
you need to start with getting a book an reading. it most likey something you didnt plug in or pinch druing the install
|
87 coupe
Member # 10919
|
posted
My idle was high also I put a new tps and a new idle air control valve and I reseted both censors and my idle isues went away that was a 93 coupe dough check for vacume leaks spray some carb cleaner good luck with the fix.
|
93NotchbackLX
Member # 12122
|
posted
could be your idle control sensor right off your throttle body, i know with my 89 fox i just had it went bad and caused me to idle high and inconsistent
|
Big block 66 f100
Member # 8867
|
posted
Oh i forgot to say i replaced the tps and the iac and i reset them the right way...
|
SacStangDriver
Member # 8304
|
posted
its a 94 blow it up!
|
autumnstang97
Member # 6111
|
posted
Go back and check all the plugs and vacuum lines...
|
Big block 66 f100
Member # 8867
|
posted
quote: Originally posted by SacStangDriver: its a 94 blow it up!
When i said positive input this is not what i was talking about...
|
SnakeBit
Member # 8871
|
posted
Is the motor stock?
|
Blue92
Member # 8789
|
posted
Clean the MAF sensor? Not sure if that is new as well or not. [ October 04, 2012, 06:17 PM: Message edited by: Blue92 ]
|
slidewayz94
Member # 3101
|
posted
quote: Originally posted by Blue92: Clean the MAF sensor? Not sure if that is new as well or not.
This. My old 94 did exact same thing and cleaning the MAF took care of the problem.
|